Remove unused footprints

diff --git a/footprints/350_Common-Mounting-Hole__130_mil_drill.fp b/footprints/350_Common-Mounting-Hole__130_mil_drill.fp
deleted file mode 100644 (file)
index b2dbf44..0000000
--- a/footprints/350_Common-Mounting-Hole__130_mil_drill.fp
+++ /dev/null
@@ -1,10 +0,0 @@
-# author:  Vanessa Ezekowitz
-# email: vanessaezekowitz@gmail.com
-# dist-license: GPL
-# use-license: unlimited
-
-Element["" "350_Common-Mounting-Hole__130_mil_drill.fp" "" "X" 291000 241000 -1000 -3000 0 100 ""]
-(
-       Pin[0 0 35000 2000 35600 13000 "1" "1" ""]
-
-       )

diff --git a/footprints/35ZLH470MEFC10X16_470uF_CAP.fp b/footprints/35ZLH470MEFC10X16_470uF_CAP.fp
deleted file mode 100644 (file)
index cbd7619..0000000
--- a/footprints/35ZLH470MEFC10X16_470uF_CAP.fp
+++ /dev/null
@@ -1,13 +0,0 @@
-# author:  Doug Coffland
-# email: dougcoffland@gmail.com
-# dist-license: GPL
-# use-license: unlimited
-
-Element["" "Rubycon 35ZLH470MEFC10X16 470uF Cap" "C?" "470uF" 0 0 0 0 0 100 ""]
-(
-       Pin[0 -2.5mm 1.3mm .5mm 1.46mm .8mm "+" "1" ""]
-       Pin[0 2.5mm 1.3mm .5mm 1.46mm .8mm "-" "2" ""]
-       ElementArc[0 0 6.25mm 6.25mm 0 360 .25mm]
-       ElementLine[-5mm -6mm -5mm -4mm .25mm]
-       ElementLine[-6mm -5mm -4mm -5mm .25mm]
-)

diff --git a/footprints/BOURNS_SRF1280-330M.fp b/footprints/BOURNS_SRF1280-330M.fp
deleted file mode 100644 (file)
index 25ba6e4..0000000
--- a/footprints/BOURNS_SRF1280-330M.fp
+++ /dev/null
@@ -1,16 +0,0 @@
-Element["" "BOURNS_SRF1280-330M.fp" "" "" 0 0 0 -10mm 0 100 ""]
-(
-  Pad[1.715mm -5.425mm 1.715mm -3.075mm 2.15mm 1mm 2.31mm "1" "1" "square"]
-  Pad[-1.715mm -5.425mm -1.715mm -3.075mm 2.15mm 1mm 2.31mm "2" "2" "square"]
-  Pad[-1.715mm 5.425mm -1.715mm 3.075mm 2.15mm 1mm 2.31mm "3" "3" "square"]
-  Pad[1.715mm 5.425mm 1.715mm 3.075mm 2.15mm 1mm 2.31mm "4" "4" "square"]
-  ElementLine[-5.25mm -7.25mm 5.25mm -7.25mm .25mm]
-  ElementArc[4mm -4mm .5mm .5mm 0 360 .5mm]
-  ElementArc[5.25mm -6.25mm 1mm 1mm 180 90 .25mm]
-  ElementLine[6.25mm -6.25mm 6.25mm 6.25mm .25mm] 
-  ElementArc[5.25mm 6.25mm 1mm 1mm 180 -90 .25mm]
-  ElementLine[5.25mm 7.25mm -5.25mm 7.25mm .25mm]
-  ElementArc[-5.25mm 6.25mm 1mm 1mm 90 -90 .25mm]
-  ElementLine[-6.25mm -6.25mm -6.25mm 6.25mm .25mm]
-  ElementArc[-5.25mm -6.25mm 1mm 1mm 0 -90 .25mm]
-)

diff --git a/footprints/CB3_OSC.fp b/footprints/CB3_OSC.fp
deleted file mode 100644 (file)
index 786e2f9..0000000
--- a/footprints/CB3_OSC.fp
+++ /dev/null
@@ -1,12 +0,0 @@
-Element[0x00000000 "CTS Crystal Oscillator" "" "" 0 0 0 0 0 100 0x00000000]
-(
-  Pad(-100 82.5 -100 82.5 79 40 100 "EOH" "1" 0x0100)
-  Pad(100 82.5 100 82.5 79 40 100 "GND" "2" 0x0100)
-  Pad(100 -82.5 100 -82.5 79 40 100 "Output" "3" 0x0100)
-  Pad(-100 -82.5 -100 -82.5 79 40 100 "Vcc" "4" 0x0100)
-  ElementLine(-140 130 160 130 10)
-  ElementLine(160 130 160 -130 10)
-  ElementLine(160 -130 -160 -130 10)
-  ElementLine(-160 -130 -160 110 10)
-  ElementLine(-160 110 -140 130 10)
-)

diff --git a/footprints/DO214AA.fp b/footprints/DO214AA.fp
deleted file mode 100644 (file)
index a0c41e2..0000000
--- a/footprints/DO214AA.fp
+++ /dev/null
@@ -1,11 +0,0 @@
-Element[0x00000000 "DO214AA SMT diode" "" "" 0 0 0 0 0 100 0x00000000]
-(
-       Pad[-8267 -787 -8267 787 7874 4000 8674 "1" "1" 0x00000100]
-       Pad[8268 -787 8268 787 7874 4000 8674 "2" "2" 0x00000100]
-       ElementLine[-4mm -1.25mm -4mm 1.25mm .5mm]
-       ElementLine[-4mm 1.25mm -2.5mm 1.7mm .25mm]
-       ElementLine[-2.5mm 1.7mm 3.8mm 1.7mm .25mm]
-       ElementLine[3.8mm 1.7mm 3.8mm -1.7mm .25mm]
-       ElementLine[3.8mm -1.7mm -2.5mm -1.7mm .25mm]
-       ElementLine[-2.5mm -1.7mm -4mm -1.25mm .25mm]
-)

diff --git a/footprints/EEU-FR1V102B_1000uF_CAP.fp b/footprints/EEU-FR1V102B_1000uF_CAP.fp
deleted file mode 100644 (file)
index 68708e9..0000000
--- a/footprints/EEU-FR1V102B_1000uF_CAP.fp
+++ /dev/null
@@ -1,13 +0,0 @@
-# author:  Doug Coffland
-# email: dougcoffland@gmail.com
-# dist-license: GPL
-# use-license: unlimited
-
-Element["" "Panasonic EEU-FR1V102B 1000uF Cap" "C?" "1000uF" 0 0 0 0 0 100 ""]
-(
-       Pin[0 -2.5mm 1.3mm .5mm 1.46mm .8mm "+" "1" ""]
-       Pin[0 2.5mm 1.3mm .5mm 1.46mm .8mm "-" "2" ""]
-       ElementArc[0 0 6.25mm 6.25mm 0 360 .25mm]
-       ElementLine[-5mm -6mm -5mm -4mm .25mm]
-       ElementLine[-6mm -5mm -4mm -5mm .25mm]
-)

diff --git a/footprints/EPCOS_CAP_6800_B41231B7688M000.fp b/footprints/EPCOS_CAP_6800_B41231B7688M000.fp
deleted file mode 100644 (file)
index c6e312f..0000000
--- a/footprints/EPCOS_CAP_6800_B41231B7688M000.fp
+++ /dev/null
@@ -1,13 +0,0 @@
-# author:  Doug Coffland
-# email: dougcoffland@gmail.com
-# dist-license: GPL
-# use-license: unlimited
-
-Element["" "EPCOS_CAP_6800_CAP_B41231B7688M000.fp" "C?" "6800uF" 0 0 -12mm -12mm 0 100 ""]
-(
-       Pin[0 -5mm 4mm 2mm 4.16mm 2mm "+" "1" ""]
-       Pin[0 5mm 4mm 2mm 4.16mm 2mm "-" "2" ""]
-       ElementArc[0 0 12.2mm 12.2mm 0 360 .25mm]
-       ElementLine[-5mm -6mm -5mm -4mm .25mm]
-       ElementLine[-6mm -5mm -4mm -5mm .25mm]
-)

diff --git a/footprints/Kingbright_WP59BL.fp b/footprints/Kingbright_WP59BL.fp
deleted file mode 100644 (file)
index 2810551..0000000
--- a/footprints/Kingbright_WP59BL.fp
+++ /dev/null
@@ -1,15 +0,0 @@
-
-Element["" "Kingbright_WP59BL/EGW.fp" "LED" "" 1.2050mm 1.1450mm 0.0000 6.0000mm 0 100 ""]
-(
-       Pin[0.0000 0.0000 1.5000mm 0.500mm 1.66mm 35.00mil "1" "1" ""]
-       Pin[100.00mil 100.00mil 1.5000mm 0.500mm 1.66mm 35.00mil "2" "2" ""]
-       Pin[200.00mil 0.0000 1.5000mm 0.500mm 1.66mm 35.00mil "3" "3" ""]
-       ElementLine [-1.0800mm -1.0200mm 6.1600mm -1.0200mm 0.2500mm]
-       ElementLine [6.1600mm -1.0200mm 6.1600mm 300.00mil 0.2500mm]
-       ElementLine [6.1600mm 300.00mil -1.0800mm 300.00mil 0.2500mm]
-       ElementLine [-1.0800mm 300.00mil -1.0800mm -1.0200mm 0.2500mm]
-       ElementLine [0.0400mm 300.00mil 0.0400mm 10.6200mm 0.2500mm]
-       ElementLine [5.0400mm 300.00mil 5.0400mm 10.6200mm 0.2500mm]
-       ElementArc [100.00mil 10.6200mm 2.5000mm 2.5000mm 0 180 0.2500mm]
-
-       )

diff --git a/footprints/LM5160_WSON.fp b/footprints/LM5160_WSON.fp
deleted file mode 100644 (file)
index 64ed390..0000000
--- a/footprints/LM5160_WSON.fp
+++ /dev/null
@@ -1,25 +0,0 @@
-
-Element["" "LM5160_WSON.fp" "U?" "" 0mm 0mm -2.5mm -4.5mm 0 100 ""]
-(
-  Pad[-0.2mm 0 .2mm 0 2.6mm 0.25mm 2.76mm "13" "13" "square"]
-  Pad[-1.25mm -2.475mm -1.25mm -1.725mm .25mm .1mm .41mm "1" "1" "square"]
-  Pad[-0.75mm -2.475mm -0.75mm -1.725mm .25mm .1mm .41mm "2" "2" "square"]
-  Pad[-0.25mm -2.475mm -0.25mm -1.725mm .25mm .1mm .41mm "3" "3" "square"]
-  Pad[0.25mm -2.475mm 0.25mm -1.725mm .25mm .1mm .41mm "4" "4" "square"]
-  Pad[0.75mm -2.475mm 0.75mm -1.725mm .25mm .1mm .41mm "5" "5" "square"]
-  Pad[1.25mm -2.475mm 1.25mm -1.725mm .25mm .1mm .41mm "6" "6" "square"]
-  Pad[1.25mm 2.475mm 1.25mm 1.725mm .25mm .1mm .41mm "7" "7" "square"]  
-  Pad[.75mm 2.475mm .75mm 1.725mm .25mm .1mm .41mm "8" "8" "square"]
-  Pad[.25mm 2.475mm .25mm 1.725mm .25mm .1mm .41mm "9" "9" "square"]
-  Pad[-0.25mm 2.475mm -0.25mm 1.725mm .25mm .1mm .41mm "10" "10" "square"]
-  Pad[-0.75mm 2.475mm -0.75mm 1.725mm .25mm .1mm .41mm "11" "11" "square"]
-  Pad[-1.25mm 2.475mm -1.25mm 1.725mm .25mm .1mm .41mm "12" "12" "square"]
-
-  ElementLine[-1.8mm -2mm -2mm -2mm 0.25mm]
-  ElementLine[-2mm -2mm -2mm 2mm 0.25mm]
-  ElementLine[-2mm 2mm -1.8mm 2mm 0.25mm]
-  ElementLine[1.8mm -2mm 2mm -2mm 0.25mm]
-  ElementLine[2mm -2mm 2mm 2mm 0.25mm]
-  ElementLine[2mm 2mm 1.8mm 2mm 0.25mm]
-  ElementArc[-1.9mm -2.4mm .1mm .1mm 0 360 .2mm]
-)

diff --git a/footprints/LQFP44_10_TMS2660.fp b/footprints/LQFP44_10_TMS2660.fp
deleted file mode 100644 (file)
index b3ee5ca..0000000
--- a/footprints/LQFP44_10_TMS2660.fp
+++ /dev/null
@@ -1,63 +0,0 @@
-Element[0x00000000 "Square Quad-side flat pack" "" "LQFP44_10" 0 0 -2000 -6000 0 100 0x00000000]
-(
-       # left row
-       Pad[-25838  -15748  -20972  -15748  1574  3000 2174 "1" "1"  0x00000100]
-       Pad[-25838  -12599  -20972  -12599  1574  3000 2174 "2" "2"  0x00000100]
-       Pad[-25838  -9449  -20972  -9449  1574  3000 2174 "3" "3"  0x00000100]
-       Pad[-25838  -6300  -20972  -6300  1574  3000 2174 "4" "4"  0x00000100]
-       Pad[-25838  -3150  -20972  -3150  1574  3000 2174 "5" "5"  0x00000100]
-       Pad[-25838  0  -20972  0  1574  3000 2174 "6" "6"  0x00000100]
-       Pad[-25838  3149  -20972  3149  1574  3000 2174 "7" "7"  0x00000100]
-       Pad[-25838  6299  -20972  6299  1574  3000 2174 "8" "8"  0x00000100]
-       Pad[-25838  9448  -20972  9448  1574  3000 2174 "9" "9"  0x00000100]
-       Pad[-25838  12598  -20972  12598  1574  3000 2174 "10" "10"  0x00000100]
-       Pad[-25838  15748  -20972  15748  1574  3000 2174 "11" "11"  0x00000100]
-       # bottom row
-       Pad[-15748 25838  -15748  20972  1574  3000 2174 "12" "12"  0x00000900]
-       Pad[-12599 25838  -12599  20972  1574  3000 2174 "13" "13"  0x00000900]
-       Pad[-9449 25838  -9449  20972  1574  3000 2174 "14" "14"  0x00000900]
-       Pad[-6300 25838  -6300  20972  1574  3000 2174 "15" "15"  0x00000900]
-       Pad[-3150 25838  -3150  20972  1574  3000 2174 "16" "16"  0x00000900]
-       Pad[0 25838  0  20972  1574  3000 2174 "17" "17"  0x00000900]
-       Pad[3149 25838  3149  20972  1574  3000 2174 "18" "18"  0x00000900]
-       Pad[6299 25838  6299  20972  1574  3000 2174 "19" "19"  0x00000900]
-       Pad[9448 25838  9448  20972  1574  3000 2174 "20" "20"  0x00000900]
-       Pad[12598 25838  12598  20972  1574  3000 2174 "21" "21"  0x00000900]
-       Pad[15748 25838  15748  20972  1574  3000 2174 "22" "22"  0x00000900]
-       # right row
-       Pad[25838  15748  20972  15748  1574  3000 2174 "23" "23"  0x00000100]
-       Pad[25838  12599  20972  12599  1574  3000 2174 "24" "24"  0x00000100]
-       Pad[25838  9449  20972  9449  1574  3000 2174 "25" "25"  0x00000100]
-       Pad[25838  6300  20972  6300  1574  3000 2174 "26" "26"  0x00000100]
-       Pad[25838  3150  20972  3150  1574  3000 2174 "27" "27"  0x00000100]
-       Pad[25838  0  20972  0  1574  3000 2174 "28" "28"  0x00000100]
-       Pad[25838  -3149  20972  -3149  1574  3000 2174 "29" "29"  0x00000100]
-       Pad[25838  -6299  20972  -6299  1574  3000 2174 "30" "30"  0x00000100]
-       Pad[25838  -9448  20972  -9448  1574  3000 2174 "31" "31"  0x00000100]
-       Pad[25838  -12598  20972  -12598  1574  3000 2174 "32" "32"  0x00000100]
-       Pad[25838  -15748  20972  -15748  1574  3000 2174 "33" "33"  0x00000100]
-       # top row
-       Pad[15748 -25838  15748  -20972  1574  3000 2174 "34" "34"  0x00000900]
-       Pad[12599 -25838  12599  -20972  1574  3000 2174 "35" "35"  0x00000900]
-       Pad[9449 -25838  9449  -20972  1574  3000 2174 "36" "36"  0x00000900]
-       Pad[6300 -25838  6300  -20972  1574  3000 2174 "37" "37"  0x00000900]
-       Pad[3150 -25838  3150  -20972  1574  3000 2174 "38" "38"  0x00000900]
-       Pad[0 -25838  0  -20972  1574  3000 2174 "39" "39"  0x00000900]
-       Pad[-3149 -25838  -3149  -20972  1574  3000 2174 "40" "40"  0x00000900]
-       Pad[-6299 -25838  -6299  -20972  1574  3000 2174 "41" "41"  0x00000900]
-       Pad[-9448 -25838  -9448  -20972  1574  3000 2174 "42" "42"  0x00000900]
-       Pad[-12598 -25838  -12598  -20972  1574  3000 2174 "43" "43"  0x00000900]
-       Pad[-15748 -25838  -15748  -20972  1574  3000 2174 "44" "44"  0x00000900]
-       # exposed paddle (if this is an exposed paddle part) 
-       # top
-       ElementLine[-16385 -19285 19285 -19285 800]
-       # right
-       ElementLine[19285 -19285 19285 19285 800]
-       # bottom
-       ElementLine[19285 19285 -19285 19285 800]
-       # left
-       ElementLine[-19285 19285 -19285 -16385 800]
-       # angled corner
-       ElementLine[-19285 -16385 -16385 -19285 800]
-       ElementArc[-16385 -16385 1000 1000 0 360 800]
-)

diff --git a/footprints/LTC6101.fp b/footprints/LTC6101.fp
deleted file mode 100644 (file)
index 1594878..0000000
--- a/footprints/LTC6101.fp
+++ /dev/null
@@ -1,19 +0,0 @@
-# element_flags, description, pcb-name, value, mark_x, mark_y,
-# text_x, text_y, text_direction, text_scale, text_flags
-Element[0x00000000 "LTC6101" "" "" 0 0 0 0 0 100 ""]
-(
-# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
-       Pad[-0.95mm -1.01mm -0.95mm -1.61mm 0.62mm .5mm 1.22mm "5" "5" "square"]
-       Pad[0.95mm -1.01mm 0.95mm -1.61mm 0.62mm .5mm 1.22mm "4" "4" "square"]
-       Pad[0.95mm 1.01mm 0.95mm 1.61mm 0.62mm .5mm 1.22mm "3" "3" "square"]
-       Pad[0mm 1.01mm 0mm 1.61mm 0.62mm .5mm 1.22mm "2" "2" "square"]
-       Pad[-0.95mm 1.01mm -0.95mm 1.61mm 0.62mm .5mm 1.22mm "1" "1" "square"]
-  ElementLine[-1.6mm -0.8mm -1.5mm -0.8mm 0.3mm]
-  ElementLine[-0.3mm -0.8mm 0.3mm -0.8mm 0.3mm]
-  ElementLine[1.5mm -0.8mm 1.6mm -0.8mm 0.3mm]
-  ElementLine[1.6mm -0.8mm 1.6mm 0.8mm 0.3mm]
-  ElementLine[1.6mm 0.8mm 1.5mm .8mm 0.3mm]
-  ElementLine[-1.5mm .8mm -1.6mm 0.8mm 0.3mm]
-  ElementLine[-1.6mm 0.8mm -1.6mm -0.8mm 0.3mm]
-  ElementArc[-1.7mm 1.3mm .1mm .1mm 0 360 0.3mm]
-)

diff --git a/footprints/Molex_39-03-0040.fp b/footprints/Molex_39-03-0040.fp
deleted file mode 100644 (file)
index 2ce12ab..0000000
--- a/footprints/Molex_39-03-0040.fp
+++ /dev/null
@@ -1,12 +0,0 @@
-Element (0x00 "Molex Element 39-30-0040" "" "" 0 0 -350 100 0 100 0x00)
-(
-  Pin(0 0 100 60 140 70 "Pin 1" "1" 0x0101)
-  Pin(0 165 100 60 140 70 "Pin 2" "2" 0x0101)
-  Pin(-217 0 100 60 140 70 "Pin 3" "3" 0x0101)
-  Pin(-217 165 100 60 140 70 "Pin 4" "4" 0x101)
-  Pin(287 83 118 0 150 118 "Mounting Hole" "1" 0x8)
-  ElementLine(-300 -107.5 510 -107.5 10)
-  ElementLine(510 -107.5 510 272.5 10)
-  ElementLine(510 272.5 -300 272.5 10)
-  ElementLine(-300 272.5 -300 -107.5 10)
-)

diff --git a/footprints/NICHICON_WT_CAP_10_10_20_mil_clearance.fp b/footprints/NICHICON_WT_CAP_10_10_20_mil_clearance.fp
deleted file mode 100644 (file)
index 8e0fe19..0000000
--- a/footprints/NICHICON_WT_CAP_10_10_20_mil_clearance.fp
+++ /dev/null
@@ -1,78 +0,0 @@
-
-       
-       # max pin width (perpendicular to axis of package) (1/100 mil)
-       
-
-       # max pin length (parallel to axis of package) (1/100 mil)
-       
-
-       # gap between the pads (1/100 mil)
-       
-
-       # package width (1/100 mil)
-       
-
-       # package height (1/100 mil)
-       
-
-       # component veritcal height off board (1/100 mil)
-       
-
-       # pad width and length
-       
-       
-
-       # y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
-       # we need a line segment of length PADL - PADW so we have end points:
-       # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
-       
-       
-
-       # width of soldermask relief (5 mil on each side)
-       
-
-       # silkscreen width (1/100 mils)
-       
-
-       # how much space to leave around the part before the
-       # silk screen (1/100 mils)
-       
-
-       # lower left corner for silk screen (1/100 mil)
-       
-       
-
-       # upper right corner for silk screen (1/100 mil)
-       
-       
-
-       # how much to notch the corners by in silk to indicate polarity
-       
-       
-       
-
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_10_10" "" "`NICHICON_WT_CAP_10_10'" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-Pad[ 0 -20078 0 -11023 6330 2000 7330 "Plus"  "1" "square"]
-Pad[ 0  20078 0  11023 6330 2000 7330 "Minus" "2" "square"]
-
-# Silk screen around package
-# ElementLine[ x1 y1 x2 y2 width]
-
-ElementLine[ 21969    21969     4465    21969    1000]
-ElementLine[ 21969    21969     21969    -18969 1000]
-ElementLine[ 21969    -18969  18969 -21969    1000]
-ElementLine[ 18969 -21969     4465    -21969    1000]
-
-ElementLine[ -21969    21969    -4465    21969    1000]
-ElementLine[ -21969    21969    -21969    -18969 1000]
-ElementLine[ -21969    -18969 -18969 -21969    1000]
-ElementLine[ -18969 -21969    -4465    -21969    1000]
-
-
-
-)
-

diff --git a/footprints/NICHICON_WT_CAP_260_mil_sq.fp b/footprints/NICHICON_WT_CAP_260_mil_sq.fp
deleted file mode 100644 (file)
index 4bdfd60..0000000
--- a/footprints/NICHICON_WT_CAP_260_mil_sq.fp
+++ /dev/null
@@ -1,21 +0,0 @@
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_260Mil_by260Mil " "" "NICHICON_WT_CAP_260" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-#Pad(0 -119 0 -73 60 20 75 "+"  "1" 0x100)
-#Pad(0 119 0 73 60 20 75 "-" "2" 0x100)
-
-Pad[0 -14370 0 -6890 6299 2000 8500 "+" "1" 0x100]
-Pad[0 14370 0 6890 6299 2000 8500 "+" "2" 0x100]
-
-ElementLine(130 130 130 -100 10)
-ElementLine(130 -100 100 -130 10)
-ElementLine(100 -130 60 -130 10)
-ElementLine(-60 -130 -100 -130 10)
-ElementLine(-100 -130 -130 -100 10)
-ElementLine(-130 -100 -130 130 10)
-ElementLine(-130 130 -60 130 10)
-ElementLine(60 130 130 130 10)
-)
-

diff --git a/footprints/NICHICON_WT_CAP_4mm.fp b/footprints/NICHICON_WT_CAP_4mm.fp
deleted file mode 100644 (file)
index 3e297c8..0000000
--- a/footprints/NICHICON_WT_CAP_4mm.fp
+++ /dev/null
@@ -1,78 +0,0 @@
-
-       
-       # max pin width (perpendicular to axis of package) (1/100 mil)
-       
-
-       # max pin length (parallel to axis of package) (1/100 mil)
-       
-
-       # gap between the pads (1/100 mil)
-       
-
-       # package width (1/100 mil)
-       
-
-       # package height (1/100 mil)
-       
-
-       # component veritcal height off board (1/100 mil)
-       
-
-       # pad width and length
-       
-       
-
-       # y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
-       # we need a line segment of length PADL - PADW so we have end points:
-       # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
-       
-       
-
-       # width of soldermask relief (5 mil on each side)
-       
-
-       # silkscreen width (1/100 mils)
-       
-
-       # how much space to leave around the part before the
-       # silk screen (1/100 mils)
-       
-
-       # lower left corner for silk screen (1/100 mil)
-       
-       
-
-       # upper right corner for silk screen (1/100 mil)
-       
-       
-
-       # how much to notch the corners by in silk to indicate polarity
-       
-       
-       
-
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_4_5p4" "" "`NICHICON_WT_CAP_4_5p4'" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-Pad[ 0 -9054 0 -5118 6299 1000 7000 "Plus"  "1" "square"]
-Pad[ 0  9054 0  5118 6299 1000 7000 "Minus" "2" "square"]
-
-# Silk screen around package
-# ElementLine[ x1 y1 x2 y2 width]
-
-ElementLine[ 10158    10158     5000    10158    1000]
-ElementLine[ 10158    10158     10158    -7158 1000]
-ElementLine[ 10158    -7158  7158 -10158    1000]
-ElementLine[ 7158 -10158     5000    -10158    1000]
-
-ElementLine[ -10158    10158    -5000    10158    1000]
-ElementLine[ -10158    10158    -10158    -7158 1000]
-ElementLine[ -10158    -7158 -7158 -10158    1000]
-ElementLine[ -7158 -10158    -5000    -10158    1000]
-
-
-
-)
-

diff --git a/footprints/NSD05_S.fp b/footprints/NSD05_S.fp
deleted file mode 100644 (file)
index b0ce1e7..0000000
--- a/footprints/NSD05_S.fp
+++ /dev/null
@@ -1,14 +0,0 @@
-Element (0x00 "NSD05-S.fp" "J?" "" 20.3mm 12.7mm -350 -175 0 100 0x00)
-(
-  Pin[10.16mm 2.54mm 2mm 1mm 2.16mm 1mm "Pin 5" "5" "square"]
-  Pin[10.16mm 10.16mm 2mm 1mm 2.16mm 1mm "Pin 2" "2" "square"]
-  Pin[10.16mm 15.24mm 2mm 1mm 2.16mm 1mm "Pin 1" "1" "square"]
-  Pin[30.48mm 2.54mm 2mm 1mm 2.16mm 1mm "Pin 4" "4" "square"]
-  Pin[30.48mm 22.86mm 2mm 1mm 2.16mm 1mm "Pin 3" "3" "square"]
-
-  ElementLine[0 0 40.6mm 0 0.25mm]
-  ElementLine[40.6mm 0 40.6mm 25.4mm 0.25mm]
-  ElementLine[40.6mm 25.4mm 0 25.4mm 0.25mm]
-  ElementLine[0 25.4mm 0 0 0.25mm]
-
-)

diff --git a/footprints/Nichicon_Cap_3mm.fp b/footprints/Nichicon_Cap_3mm.fp
deleted file mode 100644 (file)
index 3812020..0000000
--- a/footprints/Nichicon_Cap_3mm.fp
+++ /dev/null
@@ -1,14 +0,0 @@
-Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0805" 0 0 -3150 -3150 0 100 ""]
-(
-# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
-       Pad[0mm -0.65mm 0mm -1.75mm 0.8mm 0.2mm 1mm "1" "1" "square"]
-       Pad[0mm 0.65mm 0mm 1.75mm 0.8mm 0.2mm 1mm "2" "2" "square"]
-
-  ElementLine[-1.4mm -1.65mm -0.7mm -1.65mm 0.25mm]
-  ElementLine[0.7mm -1.65mm 1.4mm -1.65mm 0.25mm]
-  ElementLine[1.4mm -1.65mm 1.65mm -1.4mm 0.25mm]
-  ElementLine[1.65mm -1.4mm 1.65mm 1.65mm 0.25mm]
-  ElementLine[1.65mm 1.65mm -1.65mm 1.65mm 0.25mm]
-  ElementLine[-1.65mm 1.65mm -1.65mm -1.4mm 0.25mm]
-  ElementLine[-1.65mm -1.4mm -1.4mm -1.65mm 0.25mm]
-)

diff --git a/footprints/POWERDI123.fp b/footprints/POWERDI123.fp
deleted file mode 100644 (file)
index be71f8e..0000000
--- a/footprints/POWERDI123.fp
+++ /dev/null
@@ -1,11 +0,0 @@
-Element["" "POWERDI123.fp" "D?" "" 0 0 -2mm -2.5mm 0 100 ""]
-(
-  Pad[-1.525mm .225mm -1.525mm -0.225mm 1.05mm 1 1.31mm "1" "1" "square"]
-  Pad[.4mm 0 1.3mm 0 1.5mm 1mm 1.66mm "2" "2" "square"]
-  ElementLine[-2.5mm -1mm -2.5mm 1mm 0.25mm]
-  ElementLine[-2.5mm 1mm 1.75mm 1mm 0.25mm]
-  ElementLine[1.75mm 1mm 2.5mm 0.8mm 0.25mm]
-  ElementLine[2.5mm -0.8mm 1.75mm -1mm 0.25mm]
-  ElementLine[1.75mm -1mm -2.5mm -1mm 0.25mm]
-  ElementLine[2.6mm .85mm 2.6mm -0.85mm 0.5mm]
-)

diff --git a/footprints/Power_SO8.fp b/footprints/Power_SO8.fp
deleted file mode 100644 (file)
index 73cb530..0000000
--- a/footprints/Power_SO8.fp
+++ /dev/null
@@ -1,21 +0,0 @@
-# element_flags, description, pcb-name, value, mark_x, mark_y,
-# text_x, text_y, text_direction, text_scale, text_flags
-Element[0x00000000 "BUK7Y3R5-40E,115" "" "" 0 0 3mm 3mm 0 100 ""]
-(
-# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
-  Pad[0mm -1mm 0mm -1.25mm 4.5mm 0mm 4.66mm "Drain" "8" "square"]
-  Pad[0mm -1mm 0mm -1.25mm 4.5mm 0mm 4.66mm "Drain" "7" "square"]
-  Pad[0mm -1mm 0mm -1.25mm 4.5mm 0mm 4.66mm "Drain" "6" "square"]
-  Pad[0mm -1mm 0mm -1.25mm 4.5mm 0mm 4.66mm "Drain" "5" "square"]
-  Pad[1.905mm 2mm 1.905mm 3mm .7mm .2mm .86mm "Gate" "4" "square"]
-  Pad[-1.405mm 2.5mm 0.135mm 2.5mm 1.7mm 0mm 1.86mm "Source" "3" "square"]
-  Pad[-1.405mm 2.5mm 0.135mm 2.5mm 1.7mm 0mm 1.86mm "Source" "2" "square"]
-  Pad[-1.405mm 2.5mm 0.135mm 2.5mm 1.7mm 0mm 1.86mm "Source" "1" "square"]
-  ElementLine[-2.6mm -2.1mm -2.4mm -2.1mm .25mm]
-  ElementLine[2.4mm -2.1mm 2.6mm -2.1mm .25mm]
-  ElementLine[2.6mm -2.1mm 2.6mm 2.1mm .25mm]
-  ElementLine[2.6mm 2.1mm 2.4mm 2.1mm .25mm]
-  ElementLine[-2.4mm 2.1mm -2.6mm 2.1mm .25mm]
-  ElementLine[-2.6mm 2.1mm -2.6mm -2.1mm .25mm]
-  ElementArc[-2.6mm 2.5mm .125mm .125mm 0 360 .25mm]
-)

diff --git a/footprints/SMAJ40A.fp b/footprints/SMAJ40A.fp
deleted file mode 100644 (file)
index ff854dc..0000000
--- a/footprints/SMAJ40A.fp
+++ /dev/null
@@ -1,21 +0,0 @@
-       # grab the input values and convert to 1/100 mil
-       # how much to grow the pads by for soldermask [1/100 mil]
-       # clearance from planes [1/100 mil]
-       # silk screen width  [1/100 mil]
-       # courtyard silk screen width  [1/100 mil]
-# element_flags, description, pcb-name, value, mark_x, mark_y,
-# text_x, text_y, text_direction, text_scale, text_flags
-Element[0x00000000 "SMAJ40A DIODE" "" "" 0 0 0 0 0 100 ""]
-(
-# 
-# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
-       Pad[-2.15mm 0 -2.75mm 0 2mm .5mm 2.6mm "K" "1" "square"]
-       Pad[2.15mm 0 2.75mm 0 2mm .5mm 2.6mm "A" "2" "square"]
-       ElementLine[-4.25mm -1mm -3.75mm -1.5mm .3mm]
-       ElementLine[-3.75mm -1.5mm 4.25mm -1.5mm .3mm]
-       ElementLine[4.25mm -1.5mm 4.25mm 1.5mm .3mm]
-       ElementLine[4.25mm 1.5mm -3.75mm 1.5mm .3mm]
-       ElementLine[-3.75mm 1.5mm -4.25mm 1mm .3mm]
-       ElementLine[-4.25mm 1mm -4.25mm -1mm .3mm]
-
-)

diff --git a/footprints/SOT23_3.fp b/footprints/SOT23_3.fp
deleted file mode 100644 (file)
index 360d79a..0000000
--- a/footprints/SOT23_3.fp
+++ /dev/null
@@ -1,13 +0,0 @@
-Element(0x00 "SOT-23-3 package" "" "SOT23_3" 148 0 3 100 0x00)
-(
-  ElementLine(  0   0   0 139 10)
-  ElementLine(  0 139 128 139 10)
-  ElementLine(128 139 128   0 10)
-  ElementLine(128   0   0   0 10)
-
-  Pad( 64  25  64  31 34 "D" "1" 0x100)
-  Pad( 25 107  25 113 34 "G" "2" 0x100)
-  Pad(103 107 103 113 34 "S" "3" 0x100)
-
-  Mark(25 110)
-)

diff --git a/footprints/SOT25_AP331A.fp b/footprints/SOT25_AP331A.fp
deleted file mode 100644 (file)
index 815b19a..0000000
--- a/footprints/SOT25_AP331A.fp
+++ /dev/null
@@ -1,14 +0,0 @@
-
-Element(0x00 "SMT transistor, 5 pins" "" "SOT25" 138 0 3 100 0x00)
-(
-       ElementLine(0 0 0 139 10)
-       ElementLine(0 139 118 139 10)
-       ElementLine(118 139 118 0 10)
-       ElementLine(118 0 0 0 10)
-       Pad(20 102 20 118 24 "1" "1" 0x100)
-       Pad(59 102 59 118 24 "2" "2" 0x100)
-       Pad(98 102 98 118 24 "3" "3" 0x100)
-       Pad(98 20 98 36 24 "4" "4" 0x100)
-       Pad(20 20 20 36 24 "5" "5" 0x100)
-       Mark(20 110)
-)

diff --git a/footprints/TOSHIBA_SOP_ADVANCE_8.fp b/footprints/TOSHIBA_SOP_ADVANCE_8.fp
deleted file mode 100644 (file)
index 8e144f7..0000000
--- a/footprints/TOSHIBA_SOP_ADVANCE_8.fp
+++ /dev/null
@@ -1,21 +0,0 @@
-Element(0x00 "TOSHIBA_SOP_ADVANCE_8.fp" "" "" 0 0 0 0 0 100 0x00)
-(
-  Pad[-1.905mm 2.675mm -1.905mm 3.075mm 0.75mm .5mm 0.95mm "1" "1" "square"]
-  Pad[-0.635mm 2.675mm -0.635mm 3.075mm 0.75mm .5mm 0.95mm "2" "2" "square"]
-  Pad[0.635mm 2.675mm 0.635mm 3.075mm 0.75mm .5mm 0.95mm "3" "3" "square"]
-  Pad[1.905mm 2.675mm 1.905mm 3.075mm 0.75mm .5mm 0.95mm "4" "4" "square"]
-  Pad[0mm -1.395mm 0mm -1.205mm 4.56mm 0.5mm 4.76mm "5" "5" "square"]
-  Pad[0mm -1.395mm 0mm -1.205mm 4.56mm 0.5mm 4.76mm "6" "6" "square"]
-  Pad[0mm -1.395mm 0mm -1.205mm 4.56mm 0.5mm 4.76mm "7" "7" "square"]
-  Pad[0mm -1.395mm 0mm -1.205mm 4.56mm 0.5mm 4.76mm "8" "8" "square"]
-  
-  ElementLine[-2.4mm -2.5mm -2.6mm -2.5mm 0.25mm]
-  ElementLine[-2.6mm -2.5mm -2.6mm 2.5mm 0.25mm]
-  ElementLine[-2.4mm 2.5mm -2.6mm 2.5mm 0.25mm]
-  ElementLine[2.4mm -2.5mm 2.6mm -2.5mm 0.25mm]
-  ElementLine[2.6mm -2.5mm 2.6mm 2.5mm 0.25mm]
-  ElementLine[2.4mm 2.5mm 2.6mm 2.5mm 0.25mm]
-  ElementArc[-2.6mm 3mm .1mm .1mm 0 360 .25mm]
-  
- 
-)

diff --git a/footprints/TPS2490.fp b/footprints/TPS2490.fp
deleted file mode 100644 (file)
index a0f4b22..0000000
--- a/footprints/TPS2490.fp
+++ /dev/null
@@ -1,24 +0,0 @@
-# element_flags, description, pcb-name, value, mark_x, mark_y,
-# text_x, text_y, text_direction, text_scale, text_flags
-Element[0x00000000 "TPS2490" "" "" 0 0 0 0 0 100 ""]
-(
-# 
-# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
-       Pad[-1mm 1.625mm -1mm 2.775mm .3mm .1mm .4mm "1" "1" "square"]
-       Pad[-0.5mm 1.625mm -0.5mm 2.775mm .3mm .1mm .4mm "2" "2" "square"]
-       Pad[0mm 1.625mm 0mm 2.775mm .3mm .1mm .4mm "3" "3" "square"]
-       Pad[.5mm 1.625mm .5mm 2.775mm .3mm .1mm .4mm "4" "4" "square"]
-       Pad[1mm 1.625mm 1mm 2.775mm .3mm .1mm .4mm "5" "5" "square"]
-       Pad[1mm -1.625mm 1mm -2.775mm .3mm .1mm .4mm "6" "6" "square"]
-       Pad[.5mm -1.625mm .5mm -2.775mm .3mm .1mm .4mm "7" "7" "square"]
-       Pad[0mm -1.625mm 0mm -2.775mm .3mm .1mm .4mm "8" "8" "square"]
-       Pad[-0.5mm -1.625mm -0.5mm -2.775mm .3mm .1mm .4mm "9" "9" "square"]
-       Pad[-1mm -1.625mm -1mm -2.775mm .3mm .1mm .4mm "10" "10" "square"]
-       ElementLine[-1.7mm -1.6mm -1.7mm 1.6mm .25mm]
-  ElementLine[-1.7mm 1.6mm -1.5mm 1.6mm .25mm]
-  ElementLine[1.5mm 1.6mm 1.7mm 1.6mm .25mm]
-  ElementLine[1.7mm 1.6mm 1.7mm -1.6mm .25mm]
-  ElementLine[1.7mm -1.6mm 1.5mm -1.6mm .25mm]
-  ElementLine[-1.5mm -1.6mm -1.7mm -1.6mm .25mm]
-  ElementArc[-1mm 1mm .125mm .125mm 0 360 .25mm]
-)

diff --git a/footprints/VN5T016AH-E.fp b/footprints/VN5T016AH-E.fp
deleted file mode 100644 (file)
index 0ef655a..0000000
--- a/footprints/VN5T016AH-E.fp
+++ /dev/null
@@ -1,20 +0,0 @@
-# element_flags, description, pcb-name, value, mark_x, mark_y,
-# text_x, text_y, text_direction, text_scale, text_flags
-Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0805" 0 0 -3150 -3150 0 100 ""]
-(
-# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
-  Pad[0 0 0 0 6.5mm .2mm 6.7mm "tab" "8" "square"]
-  Pad[-2.55mm 6.475mm -2.55mm 4.4mm .55mm .2mm .75mm "1" "1" "square"]
-  Pad[-1.7mm 6.475mm -1.7mm 4.4mm .55mm .2mm .75mm "2" "2" "square"]
-  Pad[-0.85mm 6.475mm -0.85mm 4.4mm .55mm .2mm .75mm "3" "3" "square"]
-  Pad[0mm 6.475mm 0mm 4.4mm .55mm .2mm .75mm "4" "4" "square"]
-  Pad[0.85mm 6.475mm 0.85mm 4.4mm .55mm .2mm .75mm "5" "5" "square"]
-  Pad[1.7mm 6.475mm 1.7mm 4.4mm .55mm .2mm .75mm "6" "6" "square"]
-  Pad[2.55mm 6.475mm 2.55mm 4.4mm .55mm .2mm .75mm "7" "7" "square"]
-  ElementLine[-3.5mm -3.5mm -3.5mm 7mm .25mm]
-  ElementLine[-3.5mm 7mm 3.5mm 7mm .25mm]
-  ElementLine[3.5mm 7mm 3.5mm -3.5mm .25mm]
-  ElementLine[3.5mm -3.5mm -3.5mm -3.5mm .25mm]
-  ElementLine[-3.5mm 3.5mm 3.5mm 3.5mm .25mm]
-  ElementArc[-3.5mm 5.2mm .2mm .2mm 0 360 .25mm]
-)

diff --git a/footprints/pcb-mb-01.fp b/footprints/pcb-mb-01.fp
deleted file mode 100644 (file)
index 50cf4e1..0000000
--- a/footprints/pcb-mb-01.fp
+++ /dev/null
@@ -1,9 +0,0 @@
-Element(0x00 "Right-angle M3 Mounting Block" "" "" 0 0 0 0 0 100 0x00)
-(
-  Pin[0 0 3.25mm 0.25mm 3.25mm 3.25mm "1" "1" 0x08]
-
-  ElementLine[-3mm  4.5mm   3mm   4.5mm 1000]
-  ElementLine[ 3mm  4.5mm   3mm -11.5mm 1000]
-  ElementLine[-3mm -11.5mm  3mm -11.5mm 1000]
-  ElementLine[-3mm -11.5mm -3mm   4.5mm 1000]
-)

diff --git a/footprints/raspberry_pi_mount.fp b/footprints/raspberry_pi_mount.fp
deleted file mode 100644 (file)
index 8600b45..0000000
--- a/footprints/raspberry_pi_mount.fp
+++ /dev/null
@@ -1,7 +0,0 @@
-Element(0x00 "Raspberry PI mount" "" "" 0 0 -400 0 0 100 0x00)
-(
-  Pin[0 -29mm 6.2mm 1mm 6.4mm 2.75mm "MH" "" ""]
-  Pin[0 29mm 6.2mm 1mm 6.4mm 2.75mm "MH" "" ""]
-  Pin[-49mm -29mm 6.2mm 1mm 6.4mm 2.75mm "MH" "" ""]
-  Pin[-49mm 29mm 6.2mm 1mm 6.4mm 2.75mm "MH" "" ""]
-)