removed unused footprints, all NICHICON cap footprints

diff --git a/Combined/footprints/NICHICON_WT_CAP_10_10-1.fp b/Combined/footprints/NICHICON_WT_CAP_10_10-1.fp
deleted file mode 100644 (file)
index 8e0fe19..0000000
--- a/Combined/footprints/NICHICON_WT_CAP_10_10-1.fp
+++ /dev/null
@@ -1,78 +0,0 @@
-
-       
-       # max pin width (perpendicular to axis of package) (1/100 mil)
-       
-
-       # max pin length (parallel to axis of package) (1/100 mil)
-       
-
-       # gap between the pads (1/100 mil)
-       
-
-       # package width (1/100 mil)
-       
-
-       # package height (1/100 mil)
-       
-
-       # component veritcal height off board (1/100 mil)
-       
-
-       # pad width and length
-       
-       
-
-       # y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
-       # we need a line segment of length PADL - PADW so we have end points:
-       # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
-       
-       
-
-       # width of soldermask relief (5 mil on each side)
-       
-
-       # silkscreen width (1/100 mils)
-       
-
-       # how much space to leave around the part before the
-       # silk screen (1/100 mils)
-       
-
-       # lower left corner for silk screen (1/100 mil)
-       
-       
-
-       # upper right corner for silk screen (1/100 mil)
-       
-       
-
-       # how much to notch the corners by in silk to indicate polarity
-       
-       
-       
-
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_10_10" "" "`NICHICON_WT_CAP_10_10'" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-Pad[ 0 -20078 0 -11023 6330 2000 7330 "Plus"  "1" "square"]
-Pad[ 0  20078 0  11023 6330 2000 7330 "Minus" "2" "square"]
-
-# Silk screen around package
-# ElementLine[ x1 y1 x2 y2 width]
-
-ElementLine[ 21969    21969     4465    21969    1000]
-ElementLine[ 21969    21969     21969    -18969 1000]
-ElementLine[ 21969    -18969  18969 -21969    1000]
-ElementLine[ 18969 -21969     4465    -21969    1000]
-
-ElementLine[ -21969    21969    -4465    21969    1000]
-ElementLine[ -21969    21969    -21969    -18969 1000]
-ElementLine[ -21969    -18969 -18969 -21969    1000]
-ElementLine[ -18969 -21969    -4465    -21969    1000]
-
-
-
-)
-

diff --git a/Combined/footprints/NICHICON_WT_CAP_4_5p4.fp b/Combined/footprints/NICHICON_WT_CAP_4_5p4.fp
deleted file mode 100644 (file)
index fa69cbc..0000000
--- a/Combined/footprints/NICHICON_WT_CAP_4_5p4.fp
+++ /dev/null
@@ -1,78 +0,0 @@
-
-       
-       # max pin width (perpendicular to axis of package) (1/100 mil)
-       
-
-       # max pin length (parallel to axis of package) (1/100 mil)
-       
-
-       # gap between the pads (1/100 mil)
-       
-
-       # package width (1/100 mil)
-       
-
-       # package height (1/100 mil)
-       
-
-       # component veritcal height off board (1/100 mil)
-       
-
-       # pad width and length
-       
-       
-
-       # y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
-       # we need a line segment of length PADL - PADW so we have end points:
-       # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
-       
-       
-
-       # width of soldermask relief (5 mil on each side)
-       
-
-       # silkscreen width (1/100 mils)
-       
-
-       # how much space to leave around the part before the
-       # silk screen (1/100 mils)
-       
-
-       # lower left corner for silk screen (1/100 mil)
-       
-       
-
-       # upper right corner for silk screen (1/100 mil)
-       
-       
-
-       # how much to notch the corners by in silk to indicate polarity
-       
-       
-       
-
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_4_5p4" "" "`NICHICON_WT_CAP_4_5p4'" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-Pad[ 0 -8268 0 -3543 5149 1000 6149 "Plus"  "1" "square"]
-Pad[ 0  8268 0  3543 5149 1000 6149 "Minus" "2" "square"]
-
-# Silk screen around package
-# ElementLine[ x1 y1 x2 y2 width]
-
-ElementLine[ 10158    10158     3874    10158    1000]
-ElementLine[ 10158    10158     10158    -7158 1000]
-ElementLine[ 10158    -7158  7158 -10158    1000]
-ElementLine[ 7158 -10158     3874    -10158    1000]
-
-ElementLine[ -10158    10158    -3874    10158    1000]
-ElementLine[ -10158    10158    -10158    -7158 1000]
-ElementLine[ -10158    -7158 -7158 -10158    1000]
-ElementLine[ -7158 -10158    -3874    -10158    1000]
-
-
-
-)
-

diff --git a/Combined/footprints/NICHICON_WT_CAP_5_5p4.fp b/Combined/footprints/NICHICON_WT_CAP_5_5p4.fp
deleted file mode 100644 (file)
index d2ce01b..0000000
--- a/Combined/footprints/NICHICON_WT_CAP_5_5p4.fp
+++ /dev/null
@@ -1,78 +0,0 @@
-
-       
-       # max pin width (perpendicular to axis of package) (1/100 mil)
-       
-
-       # max pin length (parallel to axis of package) (1/100 mil)
-       
-
-       # gap between the pads (1/100 mil)
-       
-
-       # package width (1/100 mil)
-       
-
-       # package height (1/100 mil)
-       
-
-       # component veritcal height off board (1/100 mil)
-       
-
-       # pad width and length
-       
-       
-
-       # y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
-       # we need a line segment of length PADL - PADW so we have end points:
-       # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
-       
-       
-
-       # width of soldermask relief (5 mil on each side)
-       
-
-       # silkscreen width (1/100 mils)
-       
-
-       # how much space to leave around the part before the
-       # silk screen (1/100 mils)
-       
-
-       # lower left corner for silk screen (1/100 mil)
-       
-       
-
-       # upper right corner for silk screen (1/100 mil)
-       
-       
-
-       # how much to notch the corners by in silk to indicate polarity
-       
-       
-       
-
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_5_5p4" "" "`NICHICON_WT_CAP_5_5p4'" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-Pad[ 0 -10039 0 -4133 5149 1000 6149 "Plus"  "1" "square"]
-Pad[ 0  10039 0  4133 5149 1000 6149 "Minus" "2" "square"]
-
-# Silk screen around package
-# ElementLine[ x1 y1 x2 y2 width]
-
-ElementLine[ 12126    12126     3874    12126    1000]
-ElementLine[ 12126    12126     12126    -9126 1000]
-ElementLine[ 12126    -9126  9126 -12126    1000]
-ElementLine[ 9126 -12126     3874    -12126    1000]
-
-ElementLine[ -12126    12126    -3874    12126    1000]
-ElementLine[ -12126    12126    -12126    -9126 1000]
-ElementLine[ -12126    -9126 -9126 -12126    1000]
-ElementLine[ -9126 -12126    -3874    -12126    1000]
-
-
-
-)
-

diff --git a/Combined/footprints/NICHICON_WT_CAP_6p3_5p4.fp b/Combined/footprints/NICHICON_WT_CAP_6p3_5p4.fp
deleted file mode 100644 (file)
index 3ea4f26..0000000
--- a/Combined/footprints/NICHICON_WT_CAP_6p3_5p4.fp
+++ /dev/null
@@ -1,78 +0,0 @@
-
-       
-       # max pin width (perpendicular to axis of package) (1/100 mil)
-       
-
-       # max pin length (parallel to axis of package) (1/100 mil)
-       
-
-       # gap between the pads (1/100 mil)
-       
-
-       # package width (1/100 mil)
-       
-
-       # package height (1/100 mil)
-       
-
-       # component veritcal height off board (1/100 mil)
-       
-
-       # pad width and length
-       
-       
-
-       # y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
-       # we need a line segment of length PADL - PADW so we have end points:
-       # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
-       
-       
-
-       # width of soldermask relief (5 mil on each side)
-       
-
-       # silkscreen width (1/100 mils)
-       
-
-       # how much space to leave around the part before the
-       # silk screen (1/100 mils)
-       
-
-       # lower left corner for silk screen (1/100 mil)
-       
-       
-
-       # upper right corner for silk screen (1/100 mil)
-       
-       
-
-       # how much to notch the corners by in silk to indicate polarity
-       
-       
-       
-
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_6p3_5p4" "" "`NICHICON_WT_CAP_6p3_5p4'" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-Pad[ 0 -12992 0 -5905 5149 1000 6149 "Plus"  "1" "square"]
-Pad[ 0  12992 0  5905 5149 1000 6149 "Minus" "2" "square"]
-
-# Silk screen around package
-# ElementLine[ x1 y1 x2 y2 width]
-
-ElementLine[ 14685    14685     3874    14685    1000]
-ElementLine[ 14685    14685     14685    -11685 1000]
-ElementLine[ 14685    -11685  11685 -14685    1000]
-ElementLine[ 11685 -14685     3874    -14685    1000]
-
-ElementLine[ -14685    14685    -3874    14685    1000]
-ElementLine[ -14685    14685    -14685    -11685 1000]
-ElementLine[ -14685    -11685 -11685 -14685    1000]
-ElementLine[ -11685 -14685    -3874    -14685    1000]
-
-
-
-)
-

diff --git a/Combined/footprints/NICHICON_WT_CAP_6p3_7p7.fp b/Combined/footprints/NICHICON_WT_CAP_6p3_7p7.fp
deleted file mode 100644 (file)
index 21c9640..0000000
--- a/Combined/footprints/NICHICON_WT_CAP_6p3_7p7.fp
+++ /dev/null
@@ -1,78 +0,0 @@
-
-       
-       # max pin width (perpendicular to axis of package) (1/100 mil)
-       
-
-       # max pin length (parallel to axis of package) (1/100 mil)
-       
-
-       # gap between the pads (1/100 mil)
-       
-
-       # package width (1/100 mil)
-       
-
-       # package height (1/100 mil)
-       
-
-       # component veritcal height off board (1/100 mil)
-       
-
-       # pad width and length
-       
-       
-
-       # y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
-       # we need a line segment of length PADL - PADW so we have end points:
-       # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
-       
-       
-
-       # width of soldermask relief (5 mil on each side)
-       
-
-       # silkscreen width (1/100 mils)
-       
-
-       # how much space to leave around the part before the
-       # silk screen (1/100 mils)
-       
-
-       # lower left corner for silk screen (1/100 mil)
-       
-       
-
-       # upper right corner for silk screen (1/100 mil)
-       
-       
-
-       # how much to notch the corners by in silk to indicate polarity
-       
-       
-       
-
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_6p3_7p7" "" "`NICHICON_WT_CAP_6p3_7p7'" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-Pad[ 0 -12992 0 -5905 5149 1000 6149 "Plus"  "1" "square"]
-Pad[ 0  12992 0  5905 5149 1000 6149 "Minus" "2" "square"]
-
-# Silk screen around package
-# ElementLine[ x1 y1 x2 y2 width]
-
-ElementLine[ 14685    14685     3874    14685    1000]
-ElementLine[ 14685    14685     14685    -11685 1000]
-ElementLine[ 14685    -11685  11685 -14685    1000]
-ElementLine[ 11685 -14685     3874    -14685    1000]
-
-ElementLine[ -14685    14685    -3874    14685    1000]
-ElementLine[ -14685    14685    -14685    -11685 1000]
-ElementLine[ -14685    -11685 -11685 -14685    1000]
-ElementLine[ -11685 -14685    -3874    -14685    1000]
-
-
-
-)
-

diff --git a/Combined/footprints/NICHICON_WT_CAP_8_10.fp b/Combined/footprints/NICHICON_WT_CAP_8_10.fp
deleted file mode 100644 (file)
index f08d661..0000000
--- a/Combined/footprints/NICHICON_WT_CAP_8_10.fp
+++ /dev/null
@@ -1,78 +0,0 @@
-
-       
-       # max pin width (perpendicular to axis of package) (1/100 mil)
-       
-
-       # max pin length (parallel to axis of package) (1/100 mil)
-       
-
-       # gap between the pads (1/100 mil)
-       
-
-       # package width (1/100 mil)
-       
-
-       # package height (1/100 mil)
-       
-
-       # component veritcal height off board (1/100 mil)
-       
-
-       # pad width and length
-       
-       
-
-       # y values for drawing the pad.  The Y center of the pad is 0.5*(PINL + PINS)
-       # we need a line segment of length PADL - PADW so we have end points:
-       # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW)
-       
-       
-
-       # width of soldermask relief (5 mil on each side)
-       
-
-       # silkscreen width (1/100 mils)
-       
-
-       # how much space to leave around the part before the
-       # silk screen (1/100 mils)
-       
-
-       # lower left corner for silk screen (1/100 mil)
-       
-       
-
-       # upper right corner for silk screen (1/100 mil)
-       
-       
-
-       # how much to notch the corners by in silk to indicate polarity
-       
-       
-       
-
-# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags]
-Element[ "" "Description_nichicon_NICHICON_WT_CAP_8_10" "" "`NICHICON_WT_CAP_8_10'" 0 0 0 0 0 100 ""]
-(
-
-# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags]                                                                                              
-Pad[ 0 -16141 0 -8267 6330 2000 7330 "Plus"  "1" "square"]
-Pad[ 0  16141 0  8267 6330 2000 7330 "Minus" "2" "square"]
-
-# Silk screen around package
-# ElementLine[ x1 y1 x2 y2 width]
-
-ElementLine[ 18032    18032     4465    18032    1000]
-ElementLine[ 18032    18032     18032    -15032 1000]
-ElementLine[ 18032    -15032  15032 -18032    1000]
-ElementLine[ 15032 -18032     4465    -18032    1000]
-
-ElementLine[ -18032    18032    -4465    18032    1000]
-ElementLine[ -18032    18032    -18032    -15032 1000]
-ElementLine[ -18032    -15032 -15032 -18032    1000]
-ElementLine[ -15032 -18032    -4465    -18032    1000]
-
-
-
-)
-