From: Doug Coffland Date: Thu, 10 Sep 2015 20:45:43 +0000 (-0700) Subject: removed unused footprints, all NICHICON cap footprints X-Git-Url: https://git.buildbotics.com/?a=commitdiff_plain;h=b547225de5eb7a6a4c86b74489a9907c04d81c34;p=bbctrl-pcb removed unused footprints, all NICHICON cap footprints --- diff --git a/Combined/footprints/NICHICON_WT_CAP_10_10-1.fp b/Combined/footprints/NICHICON_WT_CAP_10_10-1.fp deleted file mode 100644 index 8e0fe19..0000000 --- a/Combined/footprints/NICHICON_WT_CAP_10_10-1.fp +++ /dev/null @@ -1,78 +0,0 @@ - - - # max pin width (perpendicular to axis of package) (1/100 mil) - - - # max pin length (parallel to axis of package) (1/100 mil) - - - # gap between the pads (1/100 mil) - - - # package width (1/100 mil) - - - # package height (1/100 mil) - - - # component veritcal height off board (1/100 mil) - - - # pad width and length - - - - # y values for drawing the pad. The Y center of the pad is 0.5*(PINL + PINS) - # we need a line segment of length PADL - PADW so we have end points: - # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW) - - - - # width of soldermask relief (5 mil on each side) - - - # silkscreen width (1/100 mils) - - - # how much space to leave around the part before the - # silk screen (1/100 mils) - - - # lower left corner for silk screen (1/100 mil) - - - - # upper right corner for silk screen (1/100 mil) - - - - # how much to notch the corners by in silk to indicate polarity - - - - -# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags] -Element[ "" "Description_nichicon_NICHICON_WT_CAP_10_10" "" "`NICHICON_WT_CAP_10_10'" 0 0 0 0 0 100 ""] -( - -# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags] -Pad[ 0 -20078 0 -11023 6330 2000 7330 "Plus" "1" "square"] -Pad[ 0 20078 0 11023 6330 2000 7330 "Minus" "2" "square"] - -# Silk screen around package -# ElementLine[ x1 y1 x2 y2 width] - -ElementLine[ 21969 21969 4465 21969 1000] -ElementLine[ 21969 21969 21969 -18969 1000] -ElementLine[ 21969 -18969 18969 -21969 1000] -ElementLine[ 18969 -21969 4465 -21969 1000] - -ElementLine[ -21969 21969 -4465 21969 1000] -ElementLine[ -21969 21969 -21969 -18969 1000] -ElementLine[ -21969 -18969 -18969 -21969 1000] -ElementLine[ -18969 -21969 -4465 -21969 1000] - - - -) - diff --git a/Combined/footprints/NICHICON_WT_CAP_4_5p4.fp b/Combined/footprints/NICHICON_WT_CAP_4_5p4.fp deleted file mode 100644 index fa69cbc..0000000 --- a/Combined/footprints/NICHICON_WT_CAP_4_5p4.fp +++ /dev/null @@ -1,78 +0,0 @@ - - - # max pin width (perpendicular to axis of package) (1/100 mil) - - - # max pin length (parallel to axis of package) (1/100 mil) - - - # gap between the pads (1/100 mil) - - - # package width (1/100 mil) - - - # package height (1/100 mil) - - - # component veritcal height off board (1/100 mil) - - - # pad width and length - - - - # y values for drawing the pad. The Y center of the pad is 0.5*(PINL + PINS) - # we need a line segment of length PADL - PADW so we have end points: - # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW) - - - - # width of soldermask relief (5 mil on each side) - - - # silkscreen width (1/100 mils) - - - # how much space to leave around the part before the - # silk screen (1/100 mils) - - - # lower left corner for silk screen (1/100 mil) - - - - # upper right corner for silk screen (1/100 mil) - - - - # how much to notch the corners by in silk to indicate polarity - - - - -# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags] -Element[ "" "Description_nichicon_NICHICON_WT_CAP_4_5p4" "" "`NICHICON_WT_CAP_4_5p4'" 0 0 0 0 0 100 ""] -( - -# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags] -Pad[ 0 -8268 0 -3543 5149 1000 6149 "Plus" "1" "square"] -Pad[ 0 8268 0 3543 5149 1000 6149 "Minus" "2" "square"] - -# Silk screen around package -# ElementLine[ x1 y1 x2 y2 width] - -ElementLine[ 10158 10158 3874 10158 1000] -ElementLine[ 10158 10158 10158 -7158 1000] -ElementLine[ 10158 -7158 7158 -10158 1000] -ElementLine[ 7158 -10158 3874 -10158 1000] - -ElementLine[ -10158 10158 -3874 10158 1000] -ElementLine[ -10158 10158 -10158 -7158 1000] -ElementLine[ -10158 -7158 -7158 -10158 1000] -ElementLine[ -7158 -10158 -3874 -10158 1000] - - - -) - diff --git a/Combined/footprints/NICHICON_WT_CAP_5_5p4.fp b/Combined/footprints/NICHICON_WT_CAP_5_5p4.fp deleted file mode 100644 index d2ce01b..0000000 --- a/Combined/footprints/NICHICON_WT_CAP_5_5p4.fp +++ /dev/null @@ -1,78 +0,0 @@ - - - # max pin width (perpendicular to axis of package) (1/100 mil) - - - # max pin length (parallel to axis of package) (1/100 mil) - - - # gap between the pads (1/100 mil) - - - # package width (1/100 mil) - - - # package height (1/100 mil) - - - # component veritcal height off board (1/100 mil) - - - # pad width and length - - - - # y values for drawing the pad. The Y center of the pad is 0.5*(PINL + PINS) - # we need a line segment of length PADL - PADW so we have end points: - # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW) - - - - # width of soldermask relief (5 mil on each side) - - - # silkscreen width (1/100 mils) - - - # how much space to leave around the part before the - # silk screen (1/100 mils) - - - # lower left corner for silk screen (1/100 mil) - - - - # upper right corner for silk screen (1/100 mil) - - - - # how much to notch the corners by in silk to indicate polarity - - - - -# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags] -Element[ "" "Description_nichicon_NICHICON_WT_CAP_5_5p4" "" "`NICHICON_WT_CAP_5_5p4'" 0 0 0 0 0 100 ""] -( - -# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags] -Pad[ 0 -10039 0 -4133 5149 1000 6149 "Plus" "1" "square"] -Pad[ 0 10039 0 4133 5149 1000 6149 "Minus" "2" "square"] - -# Silk screen around package -# ElementLine[ x1 y1 x2 y2 width] - -ElementLine[ 12126 12126 3874 12126 1000] -ElementLine[ 12126 12126 12126 -9126 1000] -ElementLine[ 12126 -9126 9126 -12126 1000] -ElementLine[ 9126 -12126 3874 -12126 1000] - -ElementLine[ -12126 12126 -3874 12126 1000] -ElementLine[ -12126 12126 -12126 -9126 1000] -ElementLine[ -12126 -9126 -9126 -12126 1000] -ElementLine[ -9126 -12126 -3874 -12126 1000] - - - -) - diff --git a/Combined/footprints/NICHICON_WT_CAP_6p3_5p4.fp b/Combined/footprints/NICHICON_WT_CAP_6p3_5p4.fp deleted file mode 100644 index 3ea4f26..0000000 --- a/Combined/footprints/NICHICON_WT_CAP_6p3_5p4.fp +++ /dev/null @@ -1,78 +0,0 @@ - - - # max pin width (perpendicular to axis of package) (1/100 mil) - - - # max pin length (parallel to axis of package) (1/100 mil) - - - # gap between the pads (1/100 mil) - - - # package width (1/100 mil) - - - # package height (1/100 mil) - - - # component veritcal height off board (1/100 mil) - - - # pad width and length - - - - # y values for drawing the pad. The Y center of the pad is 0.5*(PINL + PINS) - # we need a line segment of length PADL - PADW so we have end points: - # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW) - - - - # width of soldermask relief (5 mil on each side) - - - # silkscreen width (1/100 mils) - - - # how much space to leave around the part before the - # silk screen (1/100 mils) - - - # lower left corner for silk screen (1/100 mil) - - - - # upper right corner for silk screen (1/100 mil) - - - - # how much to notch the corners by in silk to indicate polarity - - - - -# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags] -Element[ "" "Description_nichicon_NICHICON_WT_CAP_6p3_5p4" "" "`NICHICON_WT_CAP_6p3_5p4'" 0 0 0 0 0 100 ""] -( - -# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags] -Pad[ 0 -12992 0 -5905 5149 1000 6149 "Plus" "1" "square"] -Pad[ 0 12992 0 5905 5149 1000 6149 "Minus" "2" "square"] - -# Silk screen around package -# ElementLine[ x1 y1 x2 y2 width] - -ElementLine[ 14685 14685 3874 14685 1000] -ElementLine[ 14685 14685 14685 -11685 1000] -ElementLine[ 14685 -11685 11685 -14685 1000] -ElementLine[ 11685 -14685 3874 -14685 1000] - -ElementLine[ -14685 14685 -3874 14685 1000] -ElementLine[ -14685 14685 -14685 -11685 1000] -ElementLine[ -14685 -11685 -11685 -14685 1000] -ElementLine[ -11685 -14685 -3874 -14685 1000] - - - -) - diff --git a/Combined/footprints/NICHICON_WT_CAP_6p3_7p7.fp b/Combined/footprints/NICHICON_WT_CAP_6p3_7p7.fp deleted file mode 100644 index 21c9640..0000000 --- a/Combined/footprints/NICHICON_WT_CAP_6p3_7p7.fp +++ /dev/null @@ -1,78 +0,0 @@ - - - # max pin width (perpendicular to axis of package) (1/100 mil) - - - # max pin length (parallel to axis of package) (1/100 mil) - - - # gap between the pads (1/100 mil) - - - # package width (1/100 mil) - - - # package height (1/100 mil) - - - # component veritcal height off board (1/100 mil) - - - # pad width and length - - - - # y values for drawing the pad. The Y center of the pad is 0.5*(PINL + PINS) - # we need a line segment of length PADL - PADW so we have end points: - # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW) - - - - # width of soldermask relief (5 mil on each side) - - - # silkscreen width (1/100 mils) - - - # how much space to leave around the part before the - # silk screen (1/100 mils) - - - # lower left corner for silk screen (1/100 mil) - - - - # upper right corner for silk screen (1/100 mil) - - - - # how much to notch the corners by in silk to indicate polarity - - - - -# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags] -Element[ "" "Description_nichicon_NICHICON_WT_CAP_6p3_7p7" "" "`NICHICON_WT_CAP_6p3_7p7'" 0 0 0 0 0 100 ""] -( - -# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags] -Pad[ 0 -12992 0 -5905 5149 1000 6149 "Plus" "1" "square"] -Pad[ 0 12992 0 5905 5149 1000 6149 "Minus" "2" "square"] - -# Silk screen around package -# ElementLine[ x1 y1 x2 y2 width] - -ElementLine[ 14685 14685 3874 14685 1000] -ElementLine[ 14685 14685 14685 -11685 1000] -ElementLine[ 14685 -11685 11685 -14685 1000] -ElementLine[ 11685 -14685 3874 -14685 1000] - -ElementLine[ -14685 14685 -3874 14685 1000] -ElementLine[ -14685 14685 -14685 -11685 1000] -ElementLine[ -14685 -11685 -11685 -14685 1000] -ElementLine[ -11685 -14685 -3874 -14685 1000] - - - -) - diff --git a/Combined/footprints/NICHICON_WT_CAP_8_10.fp b/Combined/footprints/NICHICON_WT_CAP_8_10.fp deleted file mode 100644 index f08d661..0000000 --- a/Combined/footprints/NICHICON_WT_CAP_8_10.fp +++ /dev/null @@ -1,78 +0,0 @@ - - - # max pin width (perpendicular to axis of package) (1/100 mil) - - - # max pin length (parallel to axis of package) (1/100 mil) - - - # gap between the pads (1/100 mil) - - - # package width (1/100 mil) - - - # package height (1/100 mil) - - - # component veritcal height off board (1/100 mil) - - - # pad width and length - - - - # y values for drawing the pad. The Y center of the pad is 0.5*(PINL + PINS) - # we need a line segment of length PADL - PADW so we have end points: - # 0.5*(PINL + PINS) +/- 0.5*(PADL - PADW) - - - - # width of soldermask relief (5 mil on each side) - - - # silkscreen width (1/100 mils) - - - # how much space to leave around the part before the - # silk screen (1/100 mils) - - - # lower left corner for silk screen (1/100 mil) - - - - # upper right corner for silk screen (1/100 mil) - - - - # how much to notch the corners by in silk to indicate polarity - - - - -# Element [SFlags "Desc" "Name" "Value" MX MY TX TY TDir TScale TSFlags] -Element[ "" "Description_nichicon_NICHICON_WT_CAP_8_10" "" "`NICHICON_WT_CAP_8_10'" 0 0 0 0 0 100 ""] -( - -# Pad [rX1 rY1 rX2 rY2 Thickness Clearance Mask "Name" "Number" SFlags] -Pad[ 0 -16141 0 -8267 6330 2000 7330 "Plus" "1" "square"] -Pad[ 0 16141 0 8267 6330 2000 7330 "Minus" "2" "square"] - -# Silk screen around package -# ElementLine[ x1 y1 x2 y2 width] - -ElementLine[ 18032 18032 4465 18032 1000] -ElementLine[ 18032 18032 18032 -15032 1000] -ElementLine[ 18032 -15032 15032 -18032 1000] -ElementLine[ 15032 -18032 4465 -18032 1000] - -ElementLine[ -18032 18032 -4465 18032 1000] -ElementLine[ -18032 18032 -18032 -15032 1000] -ElementLine[ -18032 -15032 -15032 -18032 1000] -ElementLine[ -15032 -18032 -4465 -18032 1000] - - - -) -