| 2016-10-10 |
Doug Coffland | assigned component model numbers and descriptions as... |
commit | commitdiff | tree | snapshot |
| 2016-10-10 |
Doug Coffland | added models and descriptions to new resistors in motor... |
commit | commitdiff | tree | snapshot |
| 2016-10-10 |
Doug Coffland | corrected conflicting refdes's in power.sch |
commit | commitdiff | tree | snapshot |
| 2016-10-10 |
Doug Coffland | replaced power conditioning circuit in power.schj |
commit | commitdiff | tree | snapshot |
| 2016-10-10 |
Doug Coffland | added symbols needed for new power conditioning circuit |
commit | commitdiff | tree | snapshot |
| 2016-10-10 |
Doug Coffland | added model numbers to C1 an C2 in rpi_bus.sch. The... |
commit | commitdiff | tree | snapshot |
| 2016-10-09 |
Joseph Coffland | Fixed schematic DRC violations |
commit | commitdiff | tree | snapshot |
| 2016-10-09 |
Joseph Coffland | Added motor current test points |
commit | commitdiff | tree | snapshot |
| 2016-10-09 |
Joseph Coffland | version number |
commit | commitdiff | tree | snapshot |
| 2016-10-09 |
Joseph Coffland | Added correct refdes to resistors |
commit | commitdiff | tree | snapshot |
| 2016-10-09 |
Joseph Coffland | Replaced TMC2660 with DRV8711, Added filtering to seria... |
commit | commitdiff | tree | snapshot |
| 2016-09-29 |
Joseph Coffland | Fixed cap value |
commit | commitdiff | tree | snapshot |
| 2016-08-21 |
Joseph Coffland | Updated revision number |
commit | commitdiff | tree | snapshot |
| 2016-08-20 |
Joseph Coffland | Added mounting blocks, removed unused LCD header |
commit | commitdiff | tree | snapshot |
| 2016-08-20 |
Joseph Coffland | Added solder pads to D-Sub connector |
commit | commitdiff | tree | snapshot |
| 2016-08-18 |
Doug Coffland | updated RPI connector to lower cost, shrouded connector |
commit | commitdiff | tree | snapshot |
| 2016-08-18 |
Doug Coffland | fixed soldermask clearance on seveal vias |
commit | commitdiff | tree | snapshot |
| 2016-08-18 |
Joseph Coffland | Doug's ground/power plane and clock line angle change... |
commit | commitdiff | tree | snapshot |
| 2016-08-16 |
Joseph Coffland | Split RPi footprint, Moved RPi mounting holes, Better... |
commit | commitdiff | tree | snapshot |
| 2016-08-05 |
Joseph Coffland | Check all PCB major parts, improved routing, fixed... |
commit | commitdiff | tree | snapshot |
| 2016-07-29 |
Doug Coffland | layout done, DRC and DFM errors cleared, fixed footprin... |
commit | commitdiff | tree | snapshot |
| 2016-07-28 |
Joseph Coffland | Fixed PCB schematic path, Fixed bad MOSFET pin numbers |
commit | commitdiff | tree | snapshot |
| 2016-07-28 |
Joseph Coffland | removed DXF files |
commit | commitdiff | tree | snapshot |
| 2016-07-26 |
Joseph Coffland | Added i2c bus from RPi to AVR, fixed some part numbers |
commit | commitdiff | tree | snapshot |
| 2016-07-05 |
Joseph Coffland | reorg |
commit | commitdiff | tree | snapshot |
| 2016-07-04 |
Doug Coffland | added silk screen labels to pin header test points... |
commit | commitdiff | tree | snapshot |
| 2016-07-03 |
Doug Coffland | fixed a DRC error and corrected board width to 142.3mm |
commit | commitdiff | tree | snapshot |
| 2016-07-02 |
Doug Coffland | changed some part numbers because we were using differe... |
commit | commitdiff | tree | snapshot |
| 2016-07-01 |
Doug Coffland | cleared all dfm errors and moved silkscreen labels... |
commit | commitdiff | tree | snapshot |
| 2016-07-01 |
Doug Coffland | adjusted connector positions to match panel cutouts |
commit | commitdiff | tree | snapshot |
| 2016-06-30 |
Doug Coffland | layout complete, not opens, shorts, DRC errors,or DFM... |
commit | commitdiff | tree | snapshot |
| 2016-06-29 |
Doug Coffland | added models and footprints to new components in power... |
commit | commitdiff | tree | snapshot |
| 2016-06-29 |
Joseph Coffland | Fixed schematic DRC warings/errors, added caps to H... |
commit | commitdiff | tree | snapshot |
| 2016-06-27 |
Joseph Coffland | Tweaks |
commit | commitdiff | tree | snapshot |
| 2016-06-27 |
Joseph Coffland | Updated soft power on circuit with comparator. |
commit | commitdiff | tree | snapshot |
| 2016-06-26 |
Joseph Coffland | Fixed zener alignment, added new poposed power conditio... |
commit | commitdiff | tree | snapshot |
| 2016-06-26 |
Joseph Coffland | Rearranged circuit |
commit | commitdiff | tree | snapshot |
| 2016-06-26 |
Doug Coffland | reconnected C20 to grid of Q2 |
commit | commitdiff | tree | snapshot |
| 2016-06-26 |
Doug Coffland | modified softstart circuit in power.sch, removed Zener... |
commit | commitdiff | tree | snapshot |
| 2016-06-25 |
Doug Coffland | added inrush control circuit to power.sch |
commit | commitdiff | tree | snapshot |
| 2016-06-24 |
Joseph Coffland | Added load switches back on 25-pin conn |
commit | commitdiff | tree | snapshot |
| 2016-06-24 |
Doug Coffland | adjusted clearance on SRF2012A footprint, all DFM error... |
commit | commitdiff | tree | snapshot |
| 2016-06-23 |
Doug Coffland | changed zener symbol to match footprint and updated... |
commit | commitdiff | tree | snapshot |
| 2016-06-23 |
Doug Coffland | completed layout with no DRC, no shorts, and all nets... |
commit | commitdiff | tree | snapshot |
| 2016-06-20 |
Doug Coffland | corrected wiring on P/J1, fixed wiring on motor connect... |
commit | commitdiff | tree | snapshot |
| 2016-06-19 |
Doug Coffland | corrected references to pin 2 in 0806_ext.fp and DO214A... |
commit | commitdiff | tree | snapshot |
| 2016-06-19 |
Doug Coffland | changed 0805 footprints in load.sch to 0805_ext, create... |
commit | commitdiff | tree | snapshot |
| 2016-06-19 |
Doug Coffland | added part numbers for R15 and R16 in rpi_bus.sch |
commit | commitdiff | tree | snapshot |
| 2016-06-19 |
Doug Coffland | all footprints and part numbers are now assigned in... |
commit | commitdiff | tree | snapshot |
| 2016-06-19 |
Doug Coffland | created footprints for C10, T1, Z2, and D2 in power... |
commit | commitdiff | tree | snapshot |
| 2016-06-17 |
Joseph Coffland | Rearranged AVR & DB25 pins, Moved reset line on isolato... |
commit | commitdiff | tree | snapshot |
| 2016-06-16 |
Doug Coffland | made footprint for TO277-a and referenced from power.sch |
commit | commitdiff | tree | snapshot |
| 2016-06-15 |
Doug Coffland | made footprint for 5.5V buck converter inductor |
commit | commitdiff | tree | snapshot |
| 2016-06-15 |
Doug Coffland | 5.5V buck converter components selected and footprints... |
commit | commitdiff | tree | snapshot |
| 2016-06-15 |
Doug Coffland | added HSOP8 footprint and referenced that footprint... |
commit | commitdiff | tree | snapshot |
| 2016-06-15 |
Doug Coffland | added 1210 footprint with extended pads, referenced... |
commit | commitdiff | tree | snapshot |
| 2016-06-14 |
Joseph Coffland | Dougs changes |
commit | commitdiff | tree | snapshot |
| 2016-06-13 |
Joseph Coffland | Added more specs on parts |
commit | commitdiff | tree | snapshot |
| 2016-06-13 |
Joseph Coffland | Updated power supply. Mirrors DC2014A demo manual... |
commit | commitdiff | tree | snapshot |
| 2016-06-08 |
Joseph Coffland | Added missing symbols |
commit | commitdiff | tree | snapshot |
| 2016-06-08 |
Joseph Coffland | New power supply circuit |
commit | commitdiff | tree | snapshot |
| 2016-06-03 |
Joseph Coffland | Added Doug's front and back panel layouts |
commit | commitdiff | tree | snapshot |
| 2016-06-03 |
Joseph Coffland | Attempts to fix LM5160 circuit |
commit | commitdiff | tree | snapshot |
| 2016-03-12 |
Joseph Coffland | Cleaned up sense resistor circuits |
commit | commitdiff | tree | snapshot |
| 2016-03-11 |
Doug Coffland | removed outline layer in buildbotics_controller.pcb... |
commit | commitdiff | tree | snapshot |
| 2016-03-08 |
Doug Coffland | removed spreadsheets from github on Joes recommendation... |
commit | commitdiff | tree | snapshot |
| 2016-03-08 |
Doug Coffland | Merge branch 'master' of https://github.com/buildbotics... |
commit | commitdiff | tree | snapshot |
| 2016-03-08 |
Doug Coffland | updated supporting parts list and made dxf files for... |
commit | commitdiff | tree | snapshot |
| 2016-03-01 |
Doug Coffland | completed BOM (BBC_BOM.xlsx) and centroid file (BBC_Cen... |
commit | commitdiff | tree | snapshot |
| 2016-03-01 |
Doug Coffland | implemented all of Joes recommendations; NDRC errors... |
commit | commitdiff | tree | snapshot |
| 2016-02-29 |
Joseph Coffland | Schematic cosmetic updates, changed LD#/J1 pinout,... |
commit | commitdiff | tree | snapshot |
| 2016-02-29 |
Doug Coffland | added footprint file for 2512 resistors, replaced P... |
commit | commitdiff | tree | snapshot |
| 2016-02-28 |
Joseph Coffland | Merge branch 'master' of github.com:buildbotics/machine... |
commit | commitdiff | tree | snapshot |
| 2016-02-28 |
Joseph Coffland | Fixed Schottky symbol added zener |
commit | commitdiff | tree | snapshot |
| 2016-02-28 |
Doug Coffland | changed board size to 152.3mm x 142.3mm and re-centered... |
commit | commitdiff | tree | snapshot |
| 2016-02-27 |
Joseph Coffland | Fixed Schottky symbol added zener |
commit | commitdiff | tree | snapshot |
| 2016-02-26 |
Joseph Coffland | Added reverse voltage protection |
commit | commitdiff | tree | snapshot |
| 2016-02-25 |
Joseph Coffland | Removed LED |
commit | commitdiff | tree | snapshot |
| 2016-02-25 |
Joseph Coffland | Added LCD, I2C and SPI ports to RPi |
commit | commitdiff | tree | snapshot |
| 2016-02-21 |
Doug Coffland | changed sense resistors from 1206s to 2512s; updated... |
commit | commitdiff | tree | snapshot |
| 2016-02-20 |
Doug Coffland | converted BOM to excel format; created Centroid file |
commit | commitdiff | tree | snapshot |
| 2016-02-20 |
Doug Coffland | completed bill of materials; changed ISP connector... |
commit | commitdiff | tree | snapshot |
| 2016-02-20 |
Doug Coffland | started BOM; continued to specify exact part numbers... |
commit | commitdiff | tree | snapshot |
| 2016-02-20 |
Doug Coffland | assigned specific part numbers and values to each compo... |
commit | commitdiff | tree | snapshot |
| 2016-02-19 |
Doug Coffland | board layout complete with no local DRC errors and... |
commit | commitdiff | tree | snapshot |
| 2016-02-19 |
Doug Coffland | layout complete, no DRC errors, Cleared all show stoppe... |
commit | commitdiff | tree | snapshot |
| 2016-02-18 |
Doug Coffland | changed microprocessor model and device from ATXMEGA64... |
commit | commitdiff | tree | snapshot |
| 2016-02-18 |
Doug Coffland | fixed footprints to increase clearance to make DRC... |
commit | commitdiff | tree | snapshot |
| 2016-02-18 |
Doug Coffland | PCB layout complete with no local DRC errors |
commit | commitdiff | tree | snapshot |
| 2016-02-17 |
Doug Coffland | continued layout |
commit | commitdiff | tree | snapshot |
| 2016-02-16 |
Doug Coffland | fixed footprint for LM5160 (no pin numbers were assigne... |
commit | commitdiff | tree | snapshot |
| 2016-02-16 |
Doug Coffland | corrected value for P/C4 from 4.7uF to .47uF per 8... |
commit | commitdiff | tree | snapshot |
| 2016-02-15 |
Doug Coffland | added test points for SRA and SRB at each motor driver |
commit | commitdiff | tree | snapshot |
| 2016-02-15 |
Doug Coffland | Changed pin connections on load connectors to make... |
commit | commitdiff | tree | snapshot |
| 2016-02-15 |
Doug Coffland | continued to work on layout updating buildotics_control... |
commit | commitdiff | tree | snapshot |
| 2016-02-12 |
Doug Coffland | fixed 3.3V_motor.sym to use net=3.3Vm:1 instead of... |
commit | commitdiff | tree | snapshot |
| 2016-02-12 |
Doug Coffland | added part numbers for R11, R13, C23, C24 in motor_driv... |
commit | commitdiff | tree | snapshot |
| 2016-02-11 |
Doug Coffland | started new pcb layout and extended pad lengths on... |
commit | commitdiff | tree | snapshot |
| 2016-02-11 |
Doug Coffland | modified power.sch to make switch S1 into two tabs... |
commit | commitdiff | tree | snapshot |
| 2016-02-11 |
Joseph Coffland | Merged changes, changed all 0603->0805 |
commit | commitdiff | tree | snapshot |
| next |
projects / bbctrl-pcb / shortlog