bbctrl-firmware
2019-09-25 Joseph CofflandSave more log files in bug report.
2019-09-24 Joseph CofflandPwr firmware improvements, Test shunt at startup and...
2019-09-21 Joseph CofflandFixed docs link
2019-08-31 Joseph CofflandShow power shutdown on indicators page, Show all motors...
2019-06-27 Joseph CofflandFix bug where planner position may not sync after jog
2019-06-27 Joseph CofflandBetter shunting in power firmware
2019-06-27 Joseph CofflandFix bug were fast clicks could cause jog commands to...
2019-06-21 Joseph CofflandNo log errors on HTTP 4xx status codes
2019-06-21 Joseph CofflandFix demo password check
2019-06-14 Joseph Coffland+ - Respect offsets in canned cycle moves. #219
2019-05-23 Joseph CofflandAutomatically scale max CPU speed to reduce RPi temp...
2019-05-17 Joseph Cofflanddocs
2019-05-17 Joseph CofflandBoost HDMI signal, Increased AVR serial and command...
2019-05-06 Joseph CofflandAdded support for Nowforever VFDs, Support Modbus multi...
2019-04-26 Joseph CofflandBecareful not to print during RTC callback
2019-04-26 Joseph CofflandDon't save estop state through reboot, DRV8711 SPI...
2019-04-26 Joseph CofflandFixes for motor overload detection
2019-04-24 Joseph CofflandFixed motor driver current sense gain to avoid race...
2019-04-24 Joseph CofflandAdded memory debugging, Fixed ioloop handle leak, Elimi...
2019-04-24 Joseph CofflandImprovements to cap charging and motor overload detection
2019-04-17 Joseph CofflandHandle file paths uploaded from Windows correctly
2019-04-16 Joseph CofflandFixed zeroing with non-zero offset when unhomed. #211
2019-04-02 Joseph CofflandFixed ETA line wrapping on Web interface, EStop on...
2019-03-25 Joseph CofflandAlways limit motor max-velocity. #209, Fixes for excep...
2019-03-11 Joseph CofflandFix homing switch to motor channel mapping with non...
2019-03-11 Joseph CofflandRefer to motor channel number rather than axis
2019-03-09 Joseph CofflandRestored estop text, Removed more references to power...
2019-03-04 Joseph CofflandLimit idle-current to 2A, Removed dangerous power-mode...
2019-02-20 Joseph CofflandDemo mode, Right click to enable camera crosshair.
2019-02-18 Joseph CofflandSupport fast emu demo mode
2019-02-12 Joseph CofflandAdded emu
2019-02-12 Joseph CofflandAdded emu
2019-01-19 Joseph CofflandFix VFD communication at higher baud rates (> 9600...
2019-01-19 Joseph CofflandFix zeroing homed axis after jog.
2019-01-16 Joseph CofflandChanged AVR interrupt priorities to fix random loss...
2018-12-23 Joseph CofflandFix upgrade link
2018-12-23 Joseph CofflandVersion bump
2018-12-19 Joseph CofflandUpdate planner position correctly after stop
2018-12-18 Joseph CofflandMake sure PWM gets shutoff at pause with dynamic power
2018-12-18 Joseph CofflandFix PWM not stopping at end of program
2018-12-18 Joseph CofflandIgnore errors from disconnected web socket
2018-12-18 Joseph CofflandFixed pause fail in long run due to planner ID wrap...
2018-12-16 Joseph CofflandRound floats in log output
2018-12-16 Joseph CofflandAdded back tool-reversed option
2018-12-15 Joseph CofflandOnly allow one camera stream at a time
2018-12-15 Joseph Cofflanddocs
2018-12-15 Joseph CofflandOnly allow one camera stream at a time
2018-12-15 Joseph CofflandAttempt to handle system time change
2018-12-15 Joseph CofflandTreat machine alarmed warning as an error
2018-12-05 Joseph CofflandBlink play button to indicate pause, Many layout tweaks...
2018-12-04 Joseph CofflandAdded button to download current GCode file, fixed...
2018-12-04 Joseph CofflandNew release canidate versioning, Increased max simulati...
2018-12-02 Joseph CofflandWrite version to log file, Write time to log file perio...
2018-12-02 Joseph CofflandUse cgroups to restrict Chromium memory, Send GCode...
2018-11-30 Joseph CofflandKeep units state between runs
2018-11-30 Joseph CofflandNotes for enabling GPU
2018-11-30 Joseph CofflandPrevent lockup due to browser causing out of memory...
2018-11-28 Joseph CofflandOnly render 3D view as needed to save CPU
2018-11-28 Joseph CofflandAdded Bug Report button to Admin -> General.
2018-11-28 Joseph CofflandCode clean up, move synchronize on restart back to...
2018-11-28 Joseph CofflandSet preplanner process priority
2018-11-28 Joseph CofflandRun simulation at low process priority.
2018-11-28 Joseph CofflandFixed problem with cached firmware or config file uploa...
2018-11-28 Joseph CofflandCatch all preplanner process exceptions
2018-11-28 Joseph CofflandDefault for State vars
2018-11-28 Joseph CofflandHandle id wrapping by restricting ids to 16-bit
2018-11-27 Joseph CofflandFixed problem with cached GCode file upload when file...
2018-11-27 Joseph CofflandImproved switch debouncing for better homing.
2018-11-27 Joseph CofflandHandle GCode errors with out losing state
2018-11-27 Joseph CofflandFix auto add buildbotics.nc
2018-11-27 Joseph CofflandRemoved tool-reversed option. Use tool-direction-mode...
2018-11-27 Joseph CofflandHandle zero length dwell correctly.
2018-11-27 Joseph CofflandDon't stop on estop
2018-11-27 Joseph Cofflandignore
2018-11-27 Joseph CofflandFixes program pause. Changes for move during pause.
2018-11-27 Joseph CofflandDisable outputs and jog on estop. #170
2018-11-27 Joseph CofflandFixes for speed / sync speed handling
2018-11-26 Joseph CofflandFix Huanyang configuration register. #168
2018-11-20 Joseph CofflandAdded more file extensions. Re: #163
2018-11-20 Joseph CofflandFixed Web disconnect during simulation of large GCode...
2018-11-19 Joseph CofflandSmall motor driver improvements
2018-11-17 Joseph CofflandAllow jogging during program or user pause.
2018-11-16 Joseph CofflandDon't output NaN or Infinity in JSON, improvements...
2018-11-14 Joseph CofflandAdded image of controller
2018-11-14 Joseph CofflandAdded dev docs
2018-11-14 Joseph CofflandFix for gplan build env setup
2018-11-13 Joseph CofflandMany 0.4.1 and 0.4.2 changes
2018-11-02 Joseph CofflandImproved PWM speed sync, version bump
2018-11-02 Joseph CofflandWorking on PWM speed sync
2018-11-01 Joseph CofflandAllow PWM output up to 320kHz and no slower than 8Hz...
2018-10-30 Joseph CofflandIncreased max switch backoff search, Increased AVR...
2018-10-17 Joseph CofflandFix spindle stoping problem
2018-10-17 Joseph CofflandLimit file selector width, Fix sp
2018-10-16 Joseph CofflandDon't reload browser view on reconnect unless controlle...
2018-10-16 Joseph CofflandAdded links to extra GCodes
2018-10-15 Joseph CofflandCheck axis fit and display errors/warnings.
2018-10-14 Joseph CofflandBuild system improvements, other stuff
2018-10-09 Joseph CofflandPlan timer and progress fixes
2018-10-09 Joseph CofflandAssert/Alarm system that works correctly from all inter...
2018-10-09 Joseph CofflandMore efficient code
next