bbctrl-pcb
2017-06-14 Joseph CofflandIncrease transistor pad size
2017-06-14 Joseph CofflandMoved LCD connector
2017-06-14 Joseph CofflandSmall layout improvements
2017-06-14 Joseph CofflandFixed layer colors, Removed outline layer, Routed new...
2017-06-14 Joseph CofflandAdded analog_2
2017-06-05 Doug Cofflandmade all 10,000 ohm resistors have same value of 10K
2017-06-05 Doug Cofflandmade corrections to part names so the BOM files build...
2017-05-30 Doug CofflandChanged power such that second fet on smart fet is...
2017-03-23 Doug Cofflandversion sent to Elecrow for quote
2017-03-21 Joseph CofflandAdded Do not populate to test components
2017-03-21 Joseph CofflandPCB fixes, removed 3.3v linear regulator, buck to 3...
2017-03-19 Doug Cofflandcorrected enable circuit in power.sch to ensure that...
2017-03-19 Doug Cofflandrev 8 of buildbotics_controller, includes intelligent fet
2017-03-18 Doug Cofflandno comment
2017-03-08 Doug Cofflandcorrected PGND in power_conditioner.sch and updated...
2017-03-07 Doug Cofflandcreated power_conditioner.sch (and a symbol) from power...
2017-03-03 Doug Cofflandadded diodes on outputs and added reverse battery batte...
2017-02-28 Joseph CofflandFixed silk
2017-02-28 Doug Cofflandcorrected footprint attribute for ISP and J3 in power_c...
2017-02-28 Joseph CofflandRemove unused footprints
2017-02-28 Joseph CofflandRemoved unused symbols
2017-02-28 Joseph CofflandPower cond fixes & cleanup
2017-02-27 Doug Cofflandcorrected footprint for ATiny, started power_cond.pcb...
2017-02-27 Doug Cofflandnew version of power_cond using quad intelligent fet
2017-02-26 Doug Cofflandlatest power_cond sicruit with self protecting fet...
2017-02-23 Joseph CofflandFix grid alignment, moved power_cond3 -> power_cond
2017-02-21 Doug Cofflandchanged value of sense resistor in power_cond3.sch
2017-02-21 Doug Cofflandadded new power_cond3.sch to use ST Electronics self...
2017-01-23 Joseph CofflandAdded temp sensor
2017-01-22 Joseph CofflandLarger diodes
2017-01-21 Joseph CofflandUpdate power circuit layout and lables
2017-01-21 Joseph CofflandUpdated power cond test circuit
2017-01-06 Doug Cofflandpower_cond.sch and .pcb updated, mask clearance correct...
2017-01-04 Doug Cofflandfixed solder mask violations
2017-01-04 Doug Cofflandnew test board called power_cond.sch and power_cond...
2017-01-02 Joseph Cofflandpower sims
2017-01-01 Dougcreated power_cond_12 based on LTC6101
2016-12-31 Joseph CofflandNew power sims
2016-12-30 Dougpower_cond_9x uses hot plug controller
2016-12-29 Joseph CofflandMade room for power circuits, updated revision, updated...
2016-12-29 Joseph CofflandAdded overcurrent protection
2016-12-28 Joseph CofflandRemoved unnecessary cap
2016-12-28 Joseph Cofflandnew cond sim
2016-12-28 Dougpossible circuit in power_cond_7x.asc
2016-12-28 Joseph Cofflandnew cond sim
2016-12-23 Joseph Cofflandrouting
2016-12-23 Joseph Cofflandrouting
2016-12-21 Joseph CofflandPositioning
2016-12-21 Joseph CofflandSafer 0805 part spacing
2016-12-20 Joseph CofflandMerge branch 'master' of github.com:buildbotics/pcb
2016-12-20 Joseph CofflandImproved 5v non-iso ripple
2016-11-27 Doug Cofflandconnected RPI pins to ISOGND
2016-11-26 Joseph CofflandFixed silk, Aligned polys, Move parts out of RPI conn...
2016-11-26 Joseph CofflandWidened keepout area
2016-11-25 Doug Cofflandchanged a couple of part numbers for equal valued comco...
2016-11-23 Doug Cofflandall DRC and DFM errors cleared
2016-11-23 Doug Cofflandfixed footprint for P/J1, improved footprint fo TSSOP38...
2016-11-22 Doug CofflandMerge branch 'master' of https://github.com/buildbotics/pcb
2016-11-22 Joseph CofflandAdded Vs to motor driver, other minor tweaks
2016-11-12 Doug CofflandMerge branch 'master' of https://github.com/buildbotics/pcb
2016-11-12 Doug Cofflandcorrected some part numbers
2016-11-07 Joseph CofflandIncreased clearance and thermal finger width
2016-11-06 Joseph CofflandUniform clearance
2016-11-06 Joseph CofflandUniform solder mask opening
2016-11-06 Doug Cofflandadded copper in open space on top layer for additional...
2016-11-06 Joseph CofflandPoly tweaks
2016-11-06 Joseph CofflandUse X thermals on all pins
2016-11-06 Joseph CofflandAligned polys
2016-11-06 Joseph CofflandScaled all text
2016-11-06 Joseph CofflandSame thickness for all silk lines
2016-11-06 Joseph CofflandReplaced contiguous lines
2016-11-06 Joseph CofflandFixed one Via thermal
2016-11-06 Joseph CofflandRemoved skewed lines
2016-11-06 Joseph CofflandRemoved short lines
2016-11-06 Joseph CofflandAll lines at multiples of 45 degrees
2016-11-05 Joseph CofflandFixed connector positions and locked them
2016-11-05 Joseph CofflandMoved all unlocked parts, lines and vias on to grid...
2016-11-03 Doug Cofflandassigned part numbers for components recently added
2016-11-03 Doug Cofflandadded capacitance pours to bottom layer, all DRC and...
2016-11-02 Doug Cofflandlayout complete with no legitimate DRC errors, changed...
2016-10-31 Doug CofflandMerge branch 'master' of https://github.com/buildbotics/pcb
2016-10-31 Doug Cofflandremoved and replaced caps on schematic and layout and...
2016-10-31 Dougpicked final caps
2016-10-31 Dougnew hbridge.asc
2016-10-31 DougMerge branch 'master' of https://github.com/buildbotics/pcb
2016-10-31 Dougcorrected state machine
2016-10-31 Doug Cofflandreplaced caps with values that Joe and I agreed upon
2016-10-31 Joseph CofflandUpdated hbrdige sim
2016-10-30 Joseph CofflandMerge branch 'master' of github.com:buildbotics/pcb
2016-10-30 Joseph Cofflandh-bridge sim improvements
2016-10-30 Doug Cofflandremoved all connections in layout and re-named layer...
2016-10-30 Doug Cofflandremoved unnecessary resistors in gate drive lines in...
2016-10-30 Doug Cofflandremoved old caps and imported new modeled caps into...
2016-10-30 Doug Cofflandreplaced power supply filter caps in motor_driver.sch...
2016-10-30 Doug Cofflandremoved C1 from power.sch and pcb layout
2016-10-30 Dougdidn't get hbridge.asc uploaded on last push
2016-10-30 Doug.4V PtoP ripple and cap models specified
2016-10-30 Dougremoved test file
2016-10-30 Doug'test'
2016-10-29 Dougplot settings
next