| 2020-08-07 |
Doug Coffland | resized board back to 142.3 mm wide master |
commit | commitdiff | tree | snapshot |
| 2020-08-07 |
Doug Coffland | removed resistors and caps, and added diodes on 3.3V... |
commit | commitdiff | tree | snapshot |
| 2020-07-29 |
Joseph Coffland | Switched from GPL to CERN-OHL-S license |
commit | commitdiff | tree | snapshot |
| 2019-10-24 |
Joseph Coffland | Realign with 0.25mm grid |
commit | commitdiff | tree | snapshot |
| 2019-10-24 |
Doug Coffland | removed gerbers, except for gerbers.zip, changed outlin... |
commit | commitdiff | tree | snapshot |
| 2019-10-24 |
Doug Coffland | increased hole size for PC/R31, reduced pad size for... |
commit | commitdiff | tree | snapshot |
| 2019-09-29 |
Joseph Coffland | Fixed two new DRC errors that showed up with PCB 4.2.0 |
commit | commitdiff | tree | snapshot |
| 2019-09-20 |
Doug Coffland | adjusted size of solder clearance on pads on P/u2 to... |
commit | commitdiff | tree | snapshot |
| 2019-09-19 |
Joseph Coffland | Removed unused files |
commit | commitdiff | tree | snapshot |
| 2019-09-19 |
Joseph Coffland | PCB/schematic corrections |
commit | commitdiff | tree | snapshot |
| 2019-09-19 |
Doug Coffland | added V12 to silkscreen and fiddled with R36 in Power... |
commit | commitdiff | tree | snapshot |
| 2019-09-13 |
Joseph Coffland | Removed old test circuits |
commit | commitdiff | tree | snapshot |
| 2019-09-13 |
Joseph Coffland | 20k -> 49.9k |
commit | commitdiff | tree | snapshot |
| 2019-09-12 |
Joseph Coffland | 10k -> 20k |
commit | commitdiff | tree | snapshot |
| 2019-09-12 |
Joseph Coffland | Updated copyright and version numbers, Force shunt... |
commit | commitdiff | tree | snapshot |
| 2018-10-09 |
Joseph Coffland | Added test point to extra AVR pin |
commit | commitdiff | tree | snapshot |
| 2018-09-05 |
Joseph Coffland | Added more filtering on quad FET current outputs |
commit | commitdiff | tree | snapshot |
| 2018-08-31 |
Joseph Coffland | Fixed min mask |
commit | commitdiff | tree | snapshot |
| 2018-08-31 |
Joseph Coffland | Merge branch 'master' of github.com:buildbotics/bbctrl-pcb |
commit | commitdiff | tree | snapshot |
| 2018-08-31 |
Joseph Coffland | Updated v11 pdfs |
commit | commitdiff | tree | snapshot |
| 2018-08-27 |
Doug Coffland | fixed solder mask clearances aroun vias |
commit | commitdiff | tree | snapshot |
| 2018-08-26 |
Joseph Coffland | Cleaned up PCB, moved 0-10v to D/J2 |
commit | commitdiff | tree | snapshot |
| 2018-08-26 |
Doug Coffland | marked d/j2 as (do not populate) in schematic |
commit | commitdiff | tree | snapshot |
| 2018-08-26 |
Doug Coffland | moved (do not populate" text to documetation attribute... |
commit | commitdiff | tree | snapshot |
| 2018-08-26 |
Doug Coffland | depopulated H/U1 |
commit | commitdiff | tree | snapshot |
| 2018-08-25 |
Doug Coffland | moved surface lines 3mm from edge of the board |
commit | commitdiff | tree | snapshot |
| 2018-08-23 |
Doug Coffland | moved caps on input lines on DB25 connector to the... |
commit | commitdiff | tree | snapshot |
| 2018-08-16 |
Joseph Coffland | Added PCB PDF |
commit | commitdiff | tree | snapshot |
| 2018-08-16 |
Joseph Coffland | Added 0-10v circuit, changed low-pass filter values... |
commit | commitdiff | tree | snapshot |
| 2018-08-08 |
Joseph Coffland | Removed filter from spindle PWM output |
commit | commitdiff | tree | snapshot |
| 2018-08-08 |
Joseph Coffland | v11 changes |
commit | commitdiff | tree | snapshot |
| 2018-08-08 |
Joseph Coffland | Ignore .xlsx |
commit | commitdiff | tree | snapshot |
| 2018-08-08 |
Joseph Coffland | Remove .fp in PCB footprint names |
commit | commitdiff | tree | snapshot |
| 2018-05-07 |
Joseph Coffland | More space around P/C7 |
commit | commitdiff | tree | snapshot |
| 2018-05-07 |
Joseph Coffland | Removed .fp in footprint attributes |
commit | commitdiff | tree | snapshot |
| 2018-05-07 |
Joseph Coffland | Resolved conflicts |
commit | commitdiff | tree | snapshot |
| 2018-05-07 |
Joseph Coffland | Improved H/L1 footprint |
commit | commitdiff | tree | snapshot |
| 2018-05-07 |
Joseph Coffland | Small adjustments |
commit | commitdiff | tree | snapshot |
| 2018-02-24 |
Doug Coffland | replaced PC/D1, PC/D3, and PC/D5 with new diode and... |
commit | commitdiff | tree | snapshot |
| 2018-01-16 |
Joseph Coffland | Swapped load switch nets 1<->2 |
commit | commitdiff | tree | snapshot |
| 2017-12-13 |
Doug Coffland | changed H/R25 from 26.1 to 27 ohms because Elecrow... |
commit | commitdiff | tree | snapshot |
| 2017-12-13 |
Doug Coffland | added solder mask clearance on vias under pad for P... |
commit | commitdiff | tree | snapshot |
| 2017-12-09 |
Joseph Coffland | Removed unused STL40DN3LLH5 from schematic |
commit | commitdiff | tree | snapshot |
| 2017-12-04 |
Joseph Coffland | Moved power plan away from edge |
commit | commitdiff | tree | snapshot |
| 2017-12-04 |
Joseph Coffland | Added missing file |
commit | commitdiff | tree | snapshot |
| 2017-12-04 |
Joseph Coffland | version |
commit | commitdiff | tree | snapshot |
| 2017-12-04 |
Joseph Coffland | Moved Vcc test-point, Moved vias and power trace away... |
commit | commitdiff | tree | snapshot |
| 2017-10-30 |
Joseph Coffland | Fixed solder mask openings, silk overlaps, improved... |
commit | commitdiff | tree | snapshot |
| 2017-10-29 |
Doug Coffland | subtle schematic changes for cleaning up BOM |
commit | commitdiff | tree | snapshot |
| 2017-10-28 |
Doug Coffland | V9 board layout complete, no DRC or DFM errors. added... |
commit | commitdiff | tree | snapshot |
| 2017-10-26 |
Doug Coffland | locked all test jig test points in pcb |
commit | commitdiff | tree | snapshot |
| 2017-10-21 |
Joseph Coffland | Fix rpi bus |
commit | commitdiff | tree | snapshot |
| 2017-10-21 |
Joseph Coffland | Merge branch 'no-iso' of github.com:buildbotics/bbctrl... |
commit | commitdiff | tree | snapshot |
| 2017-10-21 |
Joseph Coffland | Try powering DRV8711 logic, Replaced P/R2 with 1.37k... |
commit | commitdiff | tree | snapshot |
| 2017-10-21 |
Joseph Coffland | Remove iso |
commit | commitdiff | tree | snapshot |
| 2017-10-21 |
Joseph Coffland | Try powering DRV8711 logic, Replaced P/R2 with 1.37k... |
commit | commitdiff | tree | snapshot |
| 2017-10-03 |
Joseph Coffland | Merge branch 'master' of github.com:buildbotics/bbctrl-pcb |
commit | commitdiff | tree | snapshot |
| 2017-10-03 |
Joseph Coffland | Remove iso |
commit | commitdiff | tree | snapshot |
| 2017-10-03 |
Joseph Coffland | Added pcb pdf |
commit | commitdiff | tree | snapshot |
| 2017-10-02 |
Doug Coffland | created test board for clamper circuit |
commit | commitdiff | tree | snapshot |
| 2017-09-28 |
Doug Coffland | Merge branch 'master' of github.com:buildbotics/bbctrl-pcb |
commit | commitdiff | tree | snapshot |
| 2017-09-01 |
Joseph Coffland | Updated version and added PDF output. Closes #16 |
commit | commitdiff | tree | snapshot |
| 2017-07-13 |
Joseph Coffland | AVR 22pF -> 10pF caps, per AVR1003 app note |
commit | commitdiff | tree | snapshot |
| 2017-07-10 |
Joseph Coffland | Fixed Pwr AVR power. Vdd -> v3.3m. Oops! |
commit | commitdiff | tree | snapshot |
| 2017-07-01 |
Doug Coffland | corrected part number for R/U4 |
commit | commitdiff | tree | snapshot |
| 2017-06-29 |
Joseph Coffland | Removed SCL line resistor to enable slave clock stretching |
commit | commitdiff | tree | snapshot |
| 2017-06-29 |
Joseph Coffland | Moved Vout pwr input to PA7 to avoid problem with PC2 |
commit | commitdiff | tree | snapshot |
| 2017-06-29 |
Joseph Coffland | Small silk fix |
commit | commitdiff | tree | snapshot |
| 2017-06-29 |
Joseph Coffland | Use 1% resistors for voltage dividers |
commit | commitdiff | tree | snapshot |
| 2017-06-28 |
Joseph Coffland | Fixed silk error |
commit | commitdiff | tree | snapshot |
| 2017-06-16 |
Joseph Coffland | Layout tweaks. Fixed silk over vias |
commit | commitdiff | tree | snapshot |
| 2017-06-16 |
Doug Coffland | Increased trace size on 3.3V line from RPI, Moved r... |
commit | commitdiff | tree | snapshot |
| 2017-06-15 |
Joseph Coffland | Moved polys away from board edges |
commit | commitdiff | tree | snapshot |
| 2017-06-14 |
Joseph Coffland | Increase transistor pad size |
commit | commitdiff | tree | snapshot |
| 2017-06-14 |
Joseph Coffland | Moved LCD connector |
commit | commitdiff | tree | snapshot |
| 2017-06-14 |
Joseph Coffland | Small layout improvements |
commit | commitdiff | tree | snapshot |
| 2017-06-14 |
Joseph Coffland | Fixed layer colors, Removed outline layer, Routed new... |
commit | commitdiff | tree | snapshot |
| 2017-06-14 |
Joseph Coffland | Added analog_2 |
commit | commitdiff | tree | snapshot |
| 2017-06-05 |
Doug Coffland | made all 10,000 ohm resistors have same value of 10K |
commit | commitdiff | tree | snapshot |
| 2017-06-05 |
Doug Coffland | made corrections to part names so the BOM files build... |
commit | commitdiff | tree | snapshot |
| 2017-05-30 |
Doug Coffland | Changed power such that second fet on smart fet is... |
commit | commitdiff | tree | snapshot |
| 2017-03-23 |
Doug Coffland | version sent to Elecrow for quote |
commit | commitdiff | tree | snapshot |
| 2017-03-21 |
Joseph Coffland | Added Do not populate to test components |
commit | commitdiff | tree | snapshot |
| 2017-03-21 |
Joseph Coffland | PCB fixes, removed 3.3v linear regulator, buck to 3... |
commit | commitdiff | tree | snapshot |
| 2017-03-19 |
Doug Coffland | corrected enable circuit in power.sch to ensure that... |
commit | commitdiff | tree | snapshot |
| 2017-03-19 |
Doug Coffland | rev 8 of buildbotics_controller, includes intelligent fet |
commit | commitdiff | tree | snapshot |
| 2017-03-18 |
Doug Coffland | no comment |
commit | commitdiff | tree | snapshot |
| 2017-03-08 |
Doug Coffland | corrected PGND in power_conditioner.sch and updated... |
commit | commitdiff | tree | snapshot |
| 2017-03-07 |
Doug Coffland | created power_conditioner.sch (and a symbol) from power... |
commit | commitdiff | tree | snapshot |
| 2017-03-03 |
Doug Coffland | added diodes on outputs and added reverse battery batte... |
commit | commitdiff | tree | snapshot |
| 2017-02-28 |
Joseph Coffland | Fixed silk |
commit | commitdiff | tree | snapshot |
| 2017-02-28 |
Doug Coffland | corrected footprint attribute for ISP and J3 in power_c... |
commit | commitdiff | tree | snapshot |
| 2017-02-28 |
Joseph Coffland | Remove unused footprints |
commit | commitdiff | tree | snapshot |
| 2017-02-28 |
Joseph Coffland | Removed unused symbols |
commit | commitdiff | tree | snapshot |
| 2017-02-28 |
Joseph Coffland | Power cond fixes & cleanup |
commit | commitdiff | tree | snapshot |
| 2017-02-27 |
Doug Coffland | corrected footprint for ATiny, started power_cond.pcb... |
commit | commitdiff | tree | snapshot |
| 2017-02-27 |
Doug Coffland | new version of power_cond using quad intelligent fet |
commit | commitdiff | tree | snapshot |
| 2017-02-26 |
Doug Coffland | latest power_cond sicruit with self protecting fet... |
commit | commitdiff | tree | snapshot |
| 2017-02-23 |
Joseph Coffland | Fix grid alignment, moved power_cond3 -> power_cond |
commit | commitdiff | tree | snapshot |
| 2017-02-21 |
Doug Coffland | changed value of sense resistor in power_cond3.sch |
commit | commitdiff | tree | snapshot |
| next |
projects / bbctrl-pcb / shortlog